jsgprod

Thanks Geez!

 

 

 

Let me know how much you'd like to get for one of the spindles shipped to 30043 and I'll paypal you. 

I didn't get a chance to look for them yesterday, I will have plenty of time this weekend however.

I'll let you know.

I have one or two of them under one of the workbenches in the garage.

Also have a complete HF rear axle (without the aluminum drums). I just have to pull it off the car.

Left and right fender
Dash and door panels
Carpet
Pm if your selling these parts

I have a left fender, also have a right one but it needs some repair. As in, it's in two pieces but is complete.

I also have a dash from a 87 HF (I think it's blue, need to check again).

I have a new aftermarket carpet, still in the box that I bought from another member here years ago. I will not be needing it.

Door panels...are you talking about the interior panels or the outer lower plastic panels?

If the outside ones I have a couple of  perfect ones on some doors that are in fantastic condition...I also have a brand new set of the Heel/toe fiberglass ones still in the never opened box.

I really need to make this stuff go away!

I actually have two of them, one is on the complete HF engine I just took out of a car I have and another that I used to use on the race car.

B18A1 and the later B20A-B20Z heads all use the same 6.5mm valves stem size that the EW engines do. I've never used the stock Honda retainers from any of those engines but Ferrea has Ti retainers that work.

Part # is E11023.