Sign In
Create Account
will a stock header from a b18 fit on a d16 brown top?????
0
D16 And B18
Started by jedi420, Jan 25 2008 10:11 PM
4 replies to this topic
#1
Posted 25 January 2008 - 10:11 PM
-
- Slowpoke
-
- Group: Banned
- Location:plano,tx 75074
-
Drives: 86 civic with zc d16 brown top
-
Image Gallery
Back to top
#2
Posted 25 January 2008 - 10:18 PM
-
- Just Drive...
-
- Group: 2010 Contributing Member
- Location:San Diego, Ca
-
Drives: 84 Honda CRX, 94 Honda Civic 4dr, 95 Volvo 850 Turbo Wgn, 91 Mazda Miata
I highly doubt it will fit. The ports are probably of a different shape and spaced differently, the issue is probably the same with the studs. But, only one way to find out.
Julian
Julian
#3
Posted 26 January 2008 - 08:15 AM
-
- Demon Of All Trades
-
- Group: 2013 Contributor
- Location:Oklahoma
-
Drives: 87 Civic Si, 88 Civic DX, 90 CRX DX, 80 Trans Am, 10 Fit Sport
-
Image Gallery
View Garage
#4
Posted 26 January 2008 - 08:18 AM
-
- Slowpoke
-
- Group: Contributing Member
- Location:P R O V I D E N C E
-
Drives: 86 CRX Si, 03 350z
it will not...nothing lines up
you can take a stock SOHC D16 manifold and use it on the browntop though with a little work...you just have to portmatch one the exhaust ports with a dremel, all the studs line up
you can take a stock SOHC D16 manifold and use it on the browntop though with a little work...you just have to portmatch one the exhaust ports with a dremel, all the studs line up
#5
Posted 27 January 2008 - 05:17 PM
-
- Slowpoke
-
- Group: Members
- Location:Fort Myers Fl.
-
Drives: 87 CRX HF
most all d parts will fit other d parts
most b parts will fit other b parts
same goes with all H motors and K motors and F motors
most b parts will fit other b parts
same goes with all H motors and K motors and F motors
Community Forum Software by IP.Board
Licensed to: Red Pepper Racing