pack23

All,
I have a built 87 Turbo Honda CRX SI that I have finaly decided to turn back to NA. I built the original 1.5 Block with new heavy duty sleeves (no floating sleeves though). The sleeves sit on the block so they wont sink like my first pair of Sleeves from Darton. The block has about 10K miles on it.

I also put some forged Crower Rods in there along with Forged Arias Pistons. The Cylinder head was rebuilt but kept the stocker cam on it. The Colt Cam is long gone, I couldnt pass emissions in AZ. The turbo has been sold as well as all the electronics to support the turbo.

I just wanted to post to get a gauge to see if anyone wanted to get the engine parts such as:

Sleeved Block with ARP studs --250
Forged Crower Rods --350
Forged Arias Pistons (2.930 diameter and 8.5:1 ratio) --250
Rebuilt Cylinder Head with stock Cam --200
Centerforce Clutch and Pressure Plate --100
Rebuilt 5 Speed SI Tranny (87 model) --250
Stock Intake Manifold --30
Toga High Pressure Oil Pump -30

All the parts are still in the car, but just wanted to see if there is a market for this stuff, as everone knows, the prices above are Negotiable and they dont include shipping, so if you are interested send me a PM and I can start dismantling the engine. I didnt know how to post pics so here is the link to my site where there are plenty of pics of the parts. Also, these pics are from the parts when they were new, or after i was rebuilding the sunken sleeves.

http://picasaweb.goo...ngineInternals#

Thanks for looking.