Jump to content




Cheddajsauto Spherical Adjustable Panhard Bars


  • You cannot reply to this topic
23 replies to this topic

#16
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
QUOTE (DEIVIONCRX @ Oct 28 2010, 07:42 AM) <{POST_SNAPBACK}>
Any chance i could have this by November 12th? If not don't worry, but Ive got a back to back 2 day event 13th and 14th.



Im supposed to get my left hand tap coming in this week, but if i ship it out even monday i doubt it will be there in 10 days...sorry.

Not to everyone that they should all be done this next week.

10395168_748294558578686_901304337744719


#17
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
For those who have purchased my panhard bars, and had any issues with fitment please say so. I am now selling with the kits Poly washeres and Poly inserts to eliminate any chance of rod end movement. If your aluminum ones have any play, please say so and you will get a free Poly Kit sent to you.

10395168_748294558578686_901304337744719


#18
DEIVIONCRX

  • Demon Of All Trades
  • PipPipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Oklahoma
    • Drives: 87 Civic Si, 88 Civic DX, 90 CRX DX, 80 Trans Am, 10 Fit Sport
    • Image Gallery
    Garage View Garage
I had a little bit of a bitch getting the rod end on the axle side stub, but it was just a little rusty, i ended up just having to use the nut to press it down on the axle.
Posted Image

#19
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
QUOTE (DEIVIONCRX @ Mar 16 2011, 12:32 PM) <{POST_SNAPBACK}>
I had a little bit of a bitch getting the rod end on the axle side stub, but it was just a little rusty, i ended up just having to use the nut to press it down on the axle.


Ya thats the problem with using old parts, especially something that has a no tollerance fit like the rod ends which are exactly 20mm. Im glad you didnt have a big problem, i would love to have a picture of your installed product to show that it didnt just fit in my car if at all possible. Are you driving the car and did it adjust to the extent that you hoped?

10395168_748294558578686_901304337744719


#20
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Heres a new panhard bar just made for HONDAHOLIC out of switzerland. Also a bushing kit and shifter.



▼▼▼▼▼▼▼ Stole a picture for the thread, thank you. ▼▼▼▼▼▼▼

10395168_748294558578686_901304337744719


#21
DEIVIONCRX

  • Demon Of All Trades
  • PipPipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Oklahoma
    • Drives: 87 Civic Si, 88 Civic DX, 90 CRX DX, 80 Trans Am, 10 Fit Sport
    • Image Gallery
    Garage View Garage
Ive got 2 small pics of it insalled in my build thread, yea it went to the Autocross last week, did just fine. Ive got it adjusted almost perfect now.
Posted Image

#22
PowerWheels86

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2015 Contributor
    • Location:Houston, TX
    • Drives: 1986 CIVIC Si
    Garage View Garage
well looks like it's about that time for me to place an order for this... all i have left to get the basics of my suspension is this and my 27.5mm T-bars... :-/ i need it like crack!!

Dark Side of the Power........
Posted Image


Wheels

QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)

#23
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
QUOTE (PowerWheels86 @ Jul 2 2011, 05:41 AM) <{POST_SNAPBACK}>
well looks like it's about that time for me to place an order for this... all i have left to get the basics of my suspension is this and my 27.5mm T-bars... :-/ i need it like crack!!


Payment recieved, will be making yours withing a couple weeks, and shipped within three weeks.

10395168_748294558578686_901304337744719


#24
chedda_j

  • Lives to modify
  • PipPipPipPipPipPip
    • Group: Vendors
    • Location:Cranbrook, B.C, Canada
    • Drives: 1986 Honda Civic 2.2L LSD, Acura TL Aspec
    Garage View Garage
Two panhard bars completed for DWEND and J-Man, shipped out this week via UPS for qucik shipping from the states to avoid Custom times.


10395168_748294558578686_901304337744719