'85-SI's Content

#426748 Wtb In Ct For A B20b Swap, Teg Hubs And Brakes Aphb, Torsion.

Posted by '85-SI on 04 February 2009 - 07:33 PM in WTB

QUOTE (Airjockie @ Jan 31 2009, 06:32 PM) <{POST_SNAPBACK}>

OK, so I seamed to have snagged a car from a buddy that needed money to move. I probably paid too much, but I guess it will work. Anyways...

I will need:

86-89 teg front hubs and brakes, hell, might as well toss on the rears as well....who's got some?

A torsion bar set... I might just get the Upgrade Motoring 29mm one, unless someone has something.

I'll need a sweet adjustable pan-hard bar.

camber plates.

and I'll add more to the list when I decide what else I want...

I've got a copmplete rear brake set, disks, calipers brackets, hoses...just don't have the teg hub bolts that you will need...i've also got stock torsions if you want em...lemme know if you want any of this???

#411147 Window/door Mouldings?

Posted by '85-SI on 08 October 2008 - 10:10 PM in WTB

Does anyone have a source where i can actually get new door/ window moldings? You know the ones on the top of the door that seals the outside of the window, that the rubber comes off and they rust and look like garbage? I can't find em' anywhere. Thanks.

#411180 Window/door Mouldings?

Posted by '85-SI on 09 October 2008 - 04:17 AM in WTB

Yeah, the old crack off and paint method was my next option... I suppose I will go that route. Some nice new ones with actual rubber still on them would be nice, but we can't always get everything we want!! Thanks guys!

#425713 The Spring Kick Off In Bakersfield

Posted by '85-SI on 28 January 2009 - 01:36 AM in Meets

I'd like to meet some of you other people on here so I will try to make it, hopefully the beast is all one color by then...

#428146 Si Sunroof Replacement

Posted by '85-SI on 15 February 2009 - 06:51 AM in 1G CRX

i have a perfectly good roof panel that I will sell you as soon as my CF one arrives!!!

#414915 Shock Length Comparison

Posted by '85-SI on 06 November 2008 - 07:51 PM in 1G CRX

Does anyon have any measurements in regards to shock overall length? I know that some are shorter than others. I know that dropping the strut down is an option for the front as is adj upper plates, but I like to ride real low, the the shorter the better in my eyes, thanks!!!

#415117 Shock Length Comparison

Posted by '85-SI on 07 November 2008 - 11:46 PM in 1G CRX

Well so far nobody has even attempted to answer the real question. I don't really need suggestions on wheels or ride heights right now, but shock length is a concern. 4 inches of travel is enough with a stiff shock, torsions and springs. I have a truck on air that I drive 4 inches off th ground all day long, I understand the idea behind what I get with a shorter shock. I would appreciate if someone would actually try to help me with my question, thanks

#415227 Shock Length Comparison

Posted by '85-SI on 09 November 2008 - 02:27 AM in 1G CRX

Yeah I think I'm going to drop the front strut in the knuckle and then do the camber plates, that ought to give me a little more travel at my height.

#428729 Rpr Hoodies

Posted by '85-SI on 18 February 2009 - 09:46 PM in Off-Topic

One hoodie here, XL please...Paypal Sent...

#426622 Rear Panhard Bar Questions (kinda)

Posted by '85-SI on 03 February 2009 - 07:50 PM in 1G CRX

firstgencrx...are you still making adj. panhard bars for sale? If so PM me please, I tried to PM you and it wouldn't let me. Thanks

#428284 Rear Disk Brake Swap...

Posted by '85-SI on 16 February 2009 - 01:39 PM in FS

I've got a near complete disk brake swap for the 1g. Calipers, rotors, backplates, hoses, teg proportioniong valve, and all the hardware except for the backing plate studs (integra's are a little longer, and you need em). No trailing arms or hubs, use your existing. Make me an offer and if the price is right I can probably swing by the junkyard and snatch up the studs? Your call.

Edit: parts are in san diego, CA. Prefer local since shipping would be pricey.

#428730 Rear Brakes(aka A Topic That Has Been Beaten To Death)

Posted by '85-SI on 18 February 2009 - 09:59 PM in 1G CRX

i'm gonna remove the brakes all together and just stop with downshifting... plus it's a huge weight saving maneuver.

#427713 Rear Brakes(aka A Topic That Has Been Beaten To Death)

Posted by '85-SI on 11 February 2009 - 01:44 PM in 1G CRX

and the stupid teg disks make your rear track width wider...I'm still bent about that. Stupid offset, stupid car, stupid disk brakes... haha!! Ok all better now

#415273 Plastic Repair?

Posted by '85-SI on 09 November 2008 - 04:13 PM in 1G CRX

I asked the same question a while back and Sgt.Pepper had this little magic trick...give it a try.

http://www.redpepper...mp;#entry411149

#411179 Plastic Panel Fix?

Posted by '85-SI on 09 October 2008 - 04:14 AM in General Posts

That's genius...I never even thought of that....what a great idea...I will definitely be doing that, I will have to search for that link now to see this too. Thank you guys so much I thought I was doomed for a moment there...

#411149 Plastic Panel Fix?

Posted by '85-SI on 08 October 2008 - 10:21 PM in General Posts

As I have noticed the plastic door panels for the 1g are basically impossible to find...in an effort to repair the cracked ones I have now, does anybody have a go to method for doing such a thing...some help here would be greatly appreciated...Thanks.

#429879 Parting Out A 1985 Crx Si And Hf

Posted by '85-SI on 26 February 2009 - 06:23 PM in FS

Got a passenger plastic door garnish?

#428418 Nos Dc Sports Header 84-87 Crx/civic

Posted by '85-SI on 17 February 2009 - 01:55 AM in FS

box it up and send it my way...couple questions though, where is the o2 bung on the DC; and is this a one piece or two piece header? Doesn't really matter, just wondering...

#428734 Nos Dc Sports Header 84-87 Crx/civic

Posted by '85-SI on 18 February 2009 - 10:17 PM in FS

*payment sent*

#428585 Nos Dc Sports Header 84-87 Crx/civic

Posted by '85-SI on 17 February 2009 - 09:56 PM in FS

I'm ready to install it so at this point a box is pretty important too, haha

#425824 Lowering My Si

Posted by '85-SI on 28 January 2009 - 07:15 PM in 1G CRX

14s huh? runnin the big boys! haha

#425804 Lowering My Si

Posted by '85-SI on 28 January 2009 - 05:21 PM in 1G CRX

I would say that it kinda depends on the wheels. I'm on 13s with 185/60x13s and I have no issues at any height. Although you might end up needing to roll the drivers rear fender lip. I did and I drive pretty hard, no issues. Let's see if others agree though, this is my first 1G!