12 replies to this topic

[sm0ky]

okay i bought a SI lip and what if on my bumper i dont have the screws or a place to screw the lip in at?

i mean there is holes and i bought screws but only one hole has that thing to screw the screw into , if you know what i mean

i was thinking of appoxying the bumper to the lip but iono PLEASE HELP! !

[sm0ky]

lots of adhesive and lots of duct tape fixed my problem

[rexsk8er]

grab some zip ties they fix anything







Sean

[3gencivic]

zap strap them or go to a parts store or junkyard and get some of the clips.

[1swift1500s]

rather than adhesive and duct tape, try drilling holes in the bottom of your bumper to correspond with the holes in the lip, and then get u-clips to slide over the holes, then just screw it on like its supposed to...

my .02

Pete

[I are Corey]

there are certain clips that you use to put it on and the bolts go through those clips. i noticed when i repainted mine.

[nivek2002]

yes just go to a hardware store to get the little metal pieces for the bolts, but if your cheap you can use zip ties, allows for more play in the lip when you scrap it too

[sm0ky]

[Rampage]

           

Well Done Red-Green.

[85c-rex]

Duct tape is like the force....

It has a light side.
It has a dark side.
It holds the universe together.

Well done, young skywalker...

-Alex

[sm0ky]

pffffffffff it fell right off appoxy doesnt work

im going to buy a hex bolt with a screw so i jsut drill new holes and bolt it straight on

[OVNi_CIVIC]

guud idea

[Rampage]

I used zap-straps:






Can't tell, can ya?




Cheers,
Mark