Jump to content




1st Gen Fenders

Started by 84crxproject, Dec 01 2009 09:49 PM

  • You cannot reply to this topic
12 replies to this topic

#1
84crxproject
Posted 01 December 2009 - 09:49 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:newnan, ga
    • Drives: 84 honda crx
hey guys im new to this and was looking for some advice. i have a 84 CRX it is a project car my dad and i am working on. i was wondering if anyone knew of a website that had fenders. or if anyone had fenders they were looking to sell. thanks guys

#2
hondaguy72
Posted 01 December 2009 - 09:56 PM

  • In the left lane
  • PipPipPip
    • Group: 2011 Contributing Member
    • Location:Lake Elmo, MN
    • Drives: 1998 Odyssey
The last run of 86-87 si fenders seems to be over.84-85 fenders don't seem to have been produced in some time. You may be hosed. Stock used (uncracked) fenders are unicorns. If I'm able to repair my 84's fronts I may sell my set of 86 si fenders. They are new aftermarket units.

#3
84crxproject
Posted 01 December 2009 - 10:10 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:newnan, ga
    • Drives: 84 honda crx
QUOTE (hondaguy72 @ Dec 1 2009, 09:56 PM) <{POST_SNAPBACK}>
The last run of 86-87 si fenders seems to be over.84-85 fenders don't seem to have been produced in some time. You may be hosed. Stock used (uncracked) fenders are unicorns. If I'm able to repair my 84's fronts I may sell my set of 86 si fenders. They are new aftermarket units.



yea im looking for oem or aftermarket.

#4
greasemonkeyreborne 5x1g's
Posted 01 December 2009 - 11:14 PM

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2018 Contributor
    • Location:Foreign national in TX
    • Drives: 9 crx's: #1 228k 87si beater, #2 concours 25K, #3 108K 87si, #4 98K parts car, #5 213K 87si parts car, #6 84 straman, #7 86si 150k #8 67k parts #9 129K si for straman conversion
84 to 87 fenders are identical. Except the 86/87si's have a hole near the mudflap for the side sill garnish to attach. Other than that, no other difference.

I'm only aware of 2 types of fenders. 1) OEM's, which are very, very hard to come by. and 2) aftermarket, all seem to come from same mold in taiwan. I think a good price for aftermarkets are less than $100. Basically, look on rockauto, autousa and others and see what's cheapest.

I'll pull my data when I bought last january/feb and post here shortly. I think someone else got a good deal on some but forgot who they bought. The guy on ebay sells the same aftermarket brand. But the $60 shipping is a rip-off and drives your fender to near $150.

More to come. But I'm sure others have got more recent data for you.

Best Dave
Keepin' it OEM

#5
84crxproject
Posted 01 December 2009 - 11:41 PM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:newnan, ga
    • Drives: 84 honda crx
thanks dave, ill check the sites out.

#6
Lymitliss
Posted 02 December 2009 - 12:17 AM

  • King Luke
  • PipPipPipPipPip
    • Group: 2012 Contributor
    • Location:Seattle, Wa
    • Drives: 1986 CRX Si B18C1, 1973 240Z V8 Conversion
    Garage View Garage
partstrain.com
Build Thread- Here

#7
greasemonkeyreborne 5x1g's
Posted 04 December 2009 - 09:41 PM

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2018 Contributor
    • Location:Foreign national in TX
    • Drives: 9 crx's: #1 228k 87si beater, #2 concours 25K, #3 108K 87si, #4 98K parts car, #5 213K 87si parts car, #6 84 straman, #7 86si 150k #8 67k parts #9 129K si for straman conversion
I pulled my receipt. I got 2 fenders and a header (aftermarket) back in March for ~350 shipped. So it averaged $90 per part and $80 for shipping. Got it from autobodyparts.com. Now the internet price was more, but when I called, they dropped the price for me. I guess the economy is hitting them also. 888 251-1209.

So I'm convinced all aftermarket fenders/headers are from the same mold. So call several and pick the best price.

p/n 1382-1 for RH fender, 1382-2 LH fender, 1382-3 for header panel. Google these and pick your best price.

Good luck

D
Keepin' it OEM

#8
OG Wagon
Posted 05 December 2009 - 12:17 AM

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Mooresville, NC
    • Drives: 1986 Crx Si
QUOTE (greasemonkeyreborne 5x1g's @ Dec 4 2009, 09:41 PM) <{POST_SNAPBACK}>
I pulled my receipt. I got 2 fenders and a header (aftermarket) back in March for ~350 shipped. So it averaged $90 per part and $80 for shipping. Got it from autobodyparts.com. Now the internet price was more, but when I called, they dropped the price for me. I guess the economy is hitting them also. 888 251-1209.

So I'm convinced all aftermarket fenders/headers are from the same mold. So call several and pick the best price.

p/n 1382-1 for RH fender, 1382-2 LH fender, 1382-3 for header panel. Google these and pick your best price.

Good luck

D


GREAT info. right here. Thanks for the part numbers!


WagoCats HOOOOOOOO!!!!!

#9
84crxproject
Posted 05 December 2009 - 12:19 AM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:newnan, ga
    • Drives: 84 honda crx
yes thank alot. very good info thanks.!!!!

#10
kaymo
Posted 07 December 2009 - 07:57 PM

  • Mr.Ididntseeyousittingthereofficer
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Hickory, North Carolina
    • Drives: 74'vert Blazer, 84redrexHF (RIP), 87blackrexSI, 91STDhatch(resurrected for beater)(RIP again)
Let it be known. I plan on selling this fender to the original poster. i have arranged to have it transported by family to jackson GA for the OP to pick up on Wed or Thurs.

90 USD as agreed, i am posting all info about the sale in your thread so that there is no confusion, or discrepancy about its condition.

there are no cracks at all in the main body of the fender.the main bolt strip along the top doesnt have any breaks, but the tab closest to the windshield (the one a screw not a bolt goes in) is broken, but not completely gone.

the fender itself is somewhat tweaked and should be left in the sun prior to installation, and may require some massaging with a heat gun. this is a USED fender and sold AS IS. (thats just covermyass speak for you get exactly what i described)




QUOTE (kjeffery @ Apr 17 2009, 06:17 PM) <{POST_SNAPBACK}>
Yet again Scott, you have all the answers

QUOTE (cbstdscott @ Apr 17 2009, 07:31 PM) <{POST_SNAPBACK}>
No. All the answers are in the Kakabox build thread.

QUOTE (Lymitliss @ May 26 2009, 08:06 PM) <{POST_SNAPBACK}>
Ohh yeah I guess that makes sense. King Kaymo has all the answers :lol:

#11
Guest_-TJ_*
Posted 08 December 2009 - 09:56 PM

    • Group: Guests
If you want more body parts I have both bumpers, fenders, rockers, a hood, & 2 header panels (I'll have to revisit any cracks whatever on the header panels). My car got the Houseman/Mugen body and all this stuff is sitting in my storage shed awaiting new life on another car. Parts are ALL off my black '86 CRX Si. I'm pretty sure the fenders are crack-free. The car has been a garage-queen since 1997, and I believe the fenders are still crack-free. EMAIL tj[dot]schmidt[at]comcast[dot]net

#12
Hairy'85si
Posted 09 December 2009 - 01:10 AM

  • Granny
  • Pip
    • Group: Members
    • Location:Georgia USA
    • Drives: '85 CRX Si, '92 Integra
I have not checked, but an associate told me that Carolinas autosupply http://www.autosuppl...om/catalog.html
Has both the fenders and header panel as of a couple of weeks ago.

#13
greasemonkeyreborne 5x1g's
Posted 09 December 2009 - 09:32 AM

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2018 Contributor
    • Location:Foreign national in TX
    • Drives: 9 crx's: #1 228k 87si beater, #2 concours 25K, #3 108K 87si, #4 98K parts car, #5 213K 87si parts car, #6 84 straman, #7 86si 150k #8 67k parts #9 129K si for straman conversion
If you guys pick up some new aftermarkets, please post the price and supplier for the rest of us if you don't mind?? It seems like the lowest price supplier isn't always the same one
Keepin' it OEM
Back to Projects


  1. Red Pepper Racing
  2. → 1G Honda CRX/3G Honda Civic
  3. → Technical
  4. → Projects
  5. Board rules