21 replies to this topic

[CRXfanatic]

1987 CRX DX:

Silver over Graphite paint
Black/grey interior
Shaved & ported Si Head
DX .020 over short block
DX tranny w/Si final drive
Phantom Grip LSD
14 lb flywheel
Dual Mikuni sidedrafts
K&N filters
Webcam #148i/40 regrind
Holley pump & regulator
DC 4-2-1 ceramic header
Custom 2in exhaust w/Dynomax
MSD 6AL & Blaster coil
Magnecor 8mm wires
Energy Suspension full kit
Modified stock rear springs
Addco 3/4in rear sway bar
Lightspeed adj panhard bar
Tokico Illumina 5-ways
23mm JR torsion bars
Front camber plates
Front strut tower bar
Removed front sway
Axxis Metal Master pads
Paragon SS brake lines
Jamex race bucket
89 Civic Si pass seat
Momo 320mm steering wheel
Short throw shifter
Battery in the back
85 CRX Si 13x5 alloys w/
215/50-13 Sumitomo HTR50H


If you care...
1989 Civic Si:

Black on black
Hedman header
Custom 2in ex w/dynomax
Custom cold air intake
1989 Integra ECU
Shaved & ported head
B&R fpr & guage
ES motor mount inserts
ES shift stabilizer kit
Short shifter
H&R 1.8 lower springs
ZC/Si hybrid tranny
19mm rear sway bar
Front/rear upr strut bars
14x5.5 Teg alloys w/
185/60-14 Sumitomo HTR100
Sound system upgrade
3rd gen Teg console

[RETROCRX]

1st gen JDM ZC DOHC motor
DC Sports Header
Custom 2 1/4" exhaust, no cat, Dynomax Muffler
Cold Air Intake
High Output Coil
ZC tranny
Lightened/balanced Flywheel (14.5lbs)
Centerforce clutch
Eibach Springs
OPM 23mm Torsion Bars
Tokico Blues
Suspension Techniques Swaybars F&R
Custom Rear Stabilizer bar stiffener
Energy Suspensions Urethane Bushings
Stiffened Panhard Rod
Custom Strut Brace
Custom Chassis Stiffening braces
Seam Welded Uni-Body
Integra Rear Discs
Integra Front Brakes
Integra Master Cylinder
Metal Master Brake pads
Khumo Ecsta Supra 712 Tires 195/50 R15
O'Brien Motorsport Fibreglass fender flare kit
Sparco Evo2 Race Seat
DC Sports Blue anodized shift knob
Sparco Flash 5 Steering wheel
LED tailights under stock lenses

Few others I can't remember!

Rob  

[1stGenCRXer]

My Mods

[solo2crx]

2002 beef and cheese burrito.
aftermarket add on lettuce.
Kroger brand generic black olives.
sour cream coolant
extra cheese to prevent backfires.

Oh we were not talking about lunch.......  :0

Later,
Jason F.

[rpr]

Well, let's see:

85 DX White/Grey

H4 headlight conversion
87 teg engine
87 teg tranny
87 teg front brakes
KYB GR2 shocks
Ractive CAI
E/S poly bushings
RH Motorsports battery tie down
Full black SI interior
91 Civic SI drivers seat
87 CRX SI passenger seat
Sparco Flash 5 wheel
Sparco Curva pedals
DC Sports short shifter
DC Sports billet shift knob
Ractive billet brake handle
unknown muffler/exhaust

Soon to be installed:
MSD Blaster 3 coil
Lightspeed 24mm torsion bars
Koni Sport front shocks
Koni Special rear shocks
RH Motorsports rear torsion bar lock
87 teg rear brakes
87 teg master cylinder
lightened flywheel
87 teg dash/console
custom stainless header and full exhaust

Hey Rob, where did you get your clutch hmm...?

[87posCRX]

is it worth th different teg interior?

i thought about it

at least the seats anyways

but like the console and stuff.. sounds good

you have to do a write up on that too

oh yea heres my stuff :

87 crx

nissan solar yellow paint
ICW 16 inch rims
205/40/ZR16 Windstar tires
weird ass no-name constricting exhaust
crappy ass stock everything else

soon to go in:
everything i can get from the 87 teg im bout to take off this guys hands for 600 bucks  :0

hehe

[RETROCRX]

Tom....That's cool.....you listed stuff as RH Motorsports, I didn't even do that!!!!

As for the clutch....I bought it through work before I met you!  From Northern Performance?  (Heard of them?)

What's the matter, you jealous because I didn't buy EVERYTHING from you?

So I guess you got the sway bar lock installed......what do you think?  Significant improvment?

Lemme know man, you'll be the first person to actually try the thing besides me.  I need input!!!

Cheers

Rob (the RH in RH Motorsports!)

[rpr]

87posCRX: I haven't done the dash yet, don't even know if it will fit. If it's remotely possible it will go in. If not, I'll have to mod an SI dash for the teg cluster...

Rob: I was going to put smilies on it too, but I didn't. Did you get the clutch from Northern Motorsports or Northern Performance? Never heard of Northern Performance. As for the sway-bar lock, read my post again...

[RETROCRX]

Yeah Yeah I noticed after I hit submit I was just too lazy to edit it!

As for the distributor...lemme check the receipt....Northern Performance...AKA..Marcor Automotive!  In Hamilton?

Latex

Rob  

[rpr]

Yup, that's the place. I guess they have three names then! We just signed up with them yesterday as a supplier.

Pete Mills (I think he's the manager there) is a HADA member, even though he drives Volkswagens, so you'll meet him on Wednesday. He's down at Road Atlanta right now at the Panoz driving school for the weekend...bastard!

[Masta]

Hey Rob, you gonna join HADA?

Darren

[RETROCRX]

think so....going to the meeting on wednesday to look into it!

[rpr]

You can only come if you join...there is a secret handshake ya know...  

[87ZCSi]

I can only remember one real mod.

Turbo ZC.

[rpr]

Bah. Rookie...  

Welcome back, btw!