Sign In
Create Account
Made an adapter plate to run drive by wire throttle body
odz-fab's Content
There have been 12 items by odz-fab (Search limited from 29-April 23)
#577518 3G Si Turbo Build
Posted by
on 22 February 2017 - 10:27 PM
in
Swaps
Is anyone even on here anymore lol
Made an adapter plate to run drive by wire throttle body
Made an adapter plate to run drive by wire throttle body
#577512 3G Si Turbo Build
Posted by
on 22 February 2017 - 12:47 AM
in
Swaps
Plugged majority of the holes in the engine bay as well as cut out the brake booster portion of the firewall
Tilton pedals mounted
Made a cover plate over the reservoirs
Tilton pedals mounted
Made a cover plate over the reservoirs
#577436 3G Si Turbo Build
Posted by
on 10 February 2017 - 01:25 AM
in
Swaps
A lot of progress as well parts coming in. Hush22 slave cylinder
Made an oil feed to the rocker arms since I blocked off the vtec solinoid
Aem infinity ecu and rywire cam and crank trigger...which means I'm abandoning the kpro idea. All well this is much cooler anyways.
And cut the timing cover to fit
Made an oil feed to the rocker arms since I blocked off the vtec solinoid
Aem infinity ecu and rywire cam and crank trigger...which means I'm abandoning the kpro idea. All well this is much cooler anyways.
And cut the timing cover to fit
#577374 3G Si Turbo Build
Posted by
on 03 February 2017 - 12:37 AM
in
Swaps
Also made room for a koyo radiator
This all on a mock up engine/trans/intake manifold so I don't scratch or dirty my new engine
Inline pro manifold with gtx3076r
Also picked up the tilton clutch/brake pedal assembly. Waiting on two more master cylinders
#577373 3G Si Turbo Build
Posted by
on 03 February 2017 - 12:31 AM
in
Swaps
Welp finally got some updates lol
I'm ditching the kpro conversion , simply put too many variables that will make for headaches when it comes time to tune or troubleshoot.
Going with the aem infinity and the rywire cam/crank triggers to go coil on plug
Drive by wire throttlebody for traction control with a rear wheel speed sensor.
Ordered a new eg/D.C. Driver side engine mount to weld in the engine mounts to the frame just like the rywire 3G civic.
I'm ditching the kpro conversion , simply put too many variables that will make for headaches when it comes time to tune or troubleshoot.
Going with the aem infinity and the rywire cam/crank triggers to go coil on plug
Drive by wire throttlebody for traction control with a rear wheel speed sensor.
Ordered a new eg/D.C. Driver side engine mount to weld in the engine mounts to the frame just like the rywire 3G civic.
#576463 Blew The Engine In The Crx Today
Posted by
on 16 July 2016 - 05:03 PM
in
1G CRX
where are you located?
#575811 3G Si Turbo Build
Posted by
on 06 April 2016 - 12:15 AM
in
Swaps
Hows the build coming along!
Slow lol.....
#575669 3G Si Turbo Build
Posted by
on 21 March 2016 - 08:34 PM
in
Swaps
yes I believe 40 is stock offset..
#575624 3G Si Turbo Build
Posted by
on 18 March 2016 - 08:48 PM
in
Swaps
If you can't find someone to take that motor off your hands elsewhere, I'm sure that there are a number of people here that would buy it.
yea its pretty much up for grabs or I was thinking off saving it all for a nice stock swap in another shell down the road
#575623 3G Si Turbo Build
Posted by
on 18 March 2016 - 08:47 PM
in
Swaps
Hey brother! What type of wheel size and off set are you running to fit with the wilwood brakes? My wheels i got dont fit so trying to find out what set is needed
these are 15x7 32 offset I believe..
#575598 3G Si Turbo Build
Posted by
on 13 March 2016 - 02:46 AM
in
Swaps
In regards to the bc's I feel they are very well worth the $. making progress. Dropped the old motor today. Complete running 87 si engine/trans axles electrical ecu etc.. Any of it worth anything?
Drive shaft shop 2.9(500hp)axles came in
As well as moking up manifold and turbo
Drive shaft shop 2.9(500hp)axles came in
As well as moking up manifold and turbo
#575516 3G Si Turbo Build
Posted by
on 29 February 2016 - 11:43 PM
in
Swaps
nice!! I put the coilovers on.. I didn't take pics. nothing diff than putting on regular stuff. im impressed. quality and fitment are great
Community Forum Software by IP.Board
Licensed to: Red Pepper Racing