10 replies to this topic

[elliottbolding]

I have a hedman header that I got from Summit but it does not clear the oil pan.  Ksousa mentioned that I should try an Si oil pan, but I am not sure what Si he was referring to.  The wiki says any `85-`87 Si model oil pan will work, but is that civic and crx si pans? What else do I need to get it to work? An si pickup? thanks guys!

Edited by elliottbolding, 04 February 2014 - 03:33 PM.

[3rd gen sinner]

You will need an oil pan and pick up off of the 86/87 Civic Si, EW3/4 engine

[elliottbolding]

Thanks man your awesome.  Can it be any ew3/ew4? I found this auction on ebay, does the pan/car look like an si?http://www.ebay.com/...02fd366&vxp=mtr I think its an Si because of the extension on the hatch.

Edited by elliottbolding, 04 February 2014 - 03:53 PM.

[3rd gen sinner]

The extension on the hatch doesn't matter. The ad says for EFI. It should be the pan you need. You will need the pick up as well.

[elliottbolding]

Thanks

[goodylittle2shoe]

Rockauto.com has them new for very close to that price of the ebay one i just replaced mine and it fit great.  SPECTRA PREMIUM / COOLING DEPOT Part # HOP02A. and here is a code for 5% on rockauto 1970569617373295 

[jsgprod]

You will need an oil pan and pick up off of the 86/87 Civic Si, EW3/4 engine

 

All of the Si models, 86/86 Civic and the 85-87 CRX had the same oil pan and pick-up.

[Richardcoto452th]

Make sure they aren't warped, I have a set of those headers too and it wasn't the best quality.. I went to a custom shop to have custom flanges made.
Then I had to hammer a bit on my oil pan to clear the headers, ghetto and risky but over all it's functional. Lol

[NWClassicHonda]

I have the correct Si oil pan and correct pick up available. 206-940-8173

[elliottbolding]

Thanks everyone, I love this forum.

[NWClassicHonda]

Still have one here for ya.