Jump to content




1G Crx Rear Crossmember


  • You cannot reply to this topic
10 replies to this topic

#1
Tcyman2718

  • Granny
  • Pip
    • Group: Members
    • Drives: 86 crx hf 17 civic sport 94 accord ex
Im looking for a 1st gen crx rear crossmember cause my old one is rotted out and it needs to be replaced to pass inspection in New York State willing to pay for shipping but in any area if any parts are close by

#2
86hatchie

  • In the left lane
  • PipPipPip
    • Group: 2014 Contributor
    • Location:Greenville, SC
    • Drives: 86 Civic HB Si + 87 CRX Si

Hey,

 

I have a factory panhard bar in good shape I could ship from SC.

 

Let me know.

Tim

 

cell/text:  864 414 0205



#3
Tcyman2718

  • Granny
  • Pip
    • Group: Members
    • Drives: 86 crx hf 17 civic sport 94 accord ex

in looking for the actual crossmember part #70280-sb2664zz

 

Hey,

 

I have a factory panhard bar in good shape I could ship from SC.

 

Let me know.

Tim

 

cell/text:  864 414 0205

 



#4
86hatchie

  • In the left lane
  • PipPipPip
    • Group: 2014 Contributor
    • Location:Greenville, SC
    • Drives: 86 Civic HB Si + 87 CRX Si

I'm parting a no rust hatchback now.  Have a picture? 

 

Are you talking about the rear bumper support?

 

Tim



#5
1985 CRX SI

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2011 Contributing Member
    • Location:Akron , Ohio 44305
    • Drives: 1986 CRX si
    Garage View Garage

I believe he is looking for the panhard bar mount.



#6
Tcyman2718

  • Granny
  • Pip
    • Group: Members
    • Drives: 86 crx hf 17 civic sport 94 accord ex

I'm parting a no rust hatchback now.  Have a picture? 

 

Are you talking about the rear bumper support?

 

Tim

 

http://www.redpepper...showtopic=41791

exactly what this guy is going through the part with the hole would be the part im talking about so yes i believe the panhard bar mount



#7
86hatchie

  • In the left lane
  • PipPipPip
    • Group: 2014 Contributor
    • Location:Greenville, SC
    • Drives: 86 Civic HB Si + 87 CRX Si

OK, I see what is going on now.  You should probably talk to Kevin Acre (he is on facebook) down in Opelika Alabama.  He is cutting up a CRX now and could likely get you a clean rust free mount if you want to go that route.

 

I don't want to cut up my hatch just yet.

 

Tim 



#8
Acre's Hatch

Yes sir. About to cut up an 85 CRX. Wrecked heavy in the front. No damage or rust that I've seen on the car. How big a section do you want and where are you located.


3G Southern Civics


#9
Tcyman2718

  • Granny
  • Pip
    • Group: Members
    • Drives: 86 crx hf 17 civic sport 94 accord ex

Yes sir. About to cut up an 85 CRX. Wrecked heavy in the front. No damage or rust that I've seen on the car. How big a section do you want and where are you located.

if i could get the whole rear crossmember that would be sweet but im located in buffalo ny and theirs multiple places where this thing is rotted im just trying to have it pass inspection so i can drive it through one more winter until i put a f20b in my accord next summer



#10
kedwards

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Port Charlotte, FL
    • Drives: '04 MINI Cooper, 2011 Honda Fit

 

I'm parting a no rust hatchback now.  Have a picture? 

 

Are you talking about the rear bumper support?

 

Tim

 

http://www.redpepper...showtopic=41791

exactly what this guy is going through the part with the hole would be the part im talking about so yes i believe the panhard bar mount

 

My picture referenced above (from 2009) is no longer a good link, but my measurement lists 27"X34"X9.5", from 1/8" plate. It was pretty easy to just bolt up, and I never had any problems with it.


Keith A. Edwards
Suffolk, VA
1.75 1st gen. CRXs
former ECHC H5 Champion


#11
Acre's Hatch

I haven't forgotten you. Getting under the car while it's still daytime hasn't worked this week.


3G Southern Civics