Jump to content




Sedan Recessed Headlamp Bezel And 86-87 Headlamp Brackets


  • You cannot reply to this topic
18 replies to this topic

#1
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage

I am in need of the Sedan recessed headlamp bezel.  Actually, I want to make a set, but I need measurements.  The bottom inside depth (front to back), the bottom (left to right) and the Top depth measurement outside (the part hidden from view when mounted on the vehicle) and the top tongue measurement from the corner of the lamp opening to the center of the mounting point. PM me here or on FB

 

Thanks in advance

 

 

EDIT: I'm also looking for 86-87 sedan headlight brackets.  Just the brackets, no glass. (its cheaper to package and ship)


Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#2
3rd gen sinner

  • Slowpoke
  • PipPip
    • Group: 2016 Contributor
    • Location:Tampa FL.
    • Drives: 15 Kia Sorento, 86 Civic
    Garage View Garage

I have also been in search of these. Seems the 84/85 front ends are very hard to come by, especially here in Fl.

 

This is sort of what I'm going for.

 

image_url-6284-1518438067.jpg

 

Are you a member of any of the FB pages?

 

Here is my build on there as well.

 

Project 87 Civic Sedan



#3
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
Yes, I am. I prefer to be here, you know, where the info is
Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#4
teamsweatpants

  • Granny
  • Pip
    • Group: Members
    • Location:New England Area
    • Drives: 87 RT4WD Civic Wagovan

There's a set of the recessed lamps on ebay right now if i'm not mistaken.
 



#5
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage

Bump Edited title and first post.

 

 

Looking for sedan brackets 86-87 no glass


Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#6
Sinub

  • In the left lane
  • PipPipPip
    • Group: 2016 Contributor
    • Location:Orange County, CA
    • Drives: 2012 Civic Si, 1987 Crx Si
    Garage View Garage

Did you also post this on Facebook?



#7
millcreek

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Westminster Md.
    • Drives: 94 Samurai, 91 Samurai , 2002 Odyssey, , 2000 CRV , 97 F250, and all shop junk

I have a whole front core support for a 84-85 Civic.... Don't know if it's from a CRX, hatch or sedan. It's new! Got it some 25+ years ago when I worked at one dealer. They were going to scrap it.

 

Let me know if this will help you. 

 

Mark...



#8
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage

Did you also post this on Facebook?

I left facebook. I had my information published, without my permission, and started being harrassed at my home.  No, I didn't put it up on facebook.


Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#9
Sinub

  • In the left lane
  • PipPipPip
    • Group: 2016 Contributor
    • Location:Orange County, CA
    • Drives: 2012 Civic Si, 1987 Crx Si
    Garage View Garage

I left facebook. I had my information published, without my permission, and started being harrassed at my home.  No, I didn't put it up on facebook.

 

Well if you'd like, I can share this post for you on the Facebook group page. I'm sure more people will see this that way. 



#10
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage

sure, that would be ok.Thanks


Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#11
3rd gen sinner

  • Slowpoke
  • PipPip
    • Group: 2016 Contributor
    • Location:Tampa FL.
    • Drives: 15 Kia Sorento, 86 Civic
    Garage View Garage

I'm picking a set of these custom 86/87 recessed buckets from Malaysia. 

 

image_url-6284-1520075950.jpg

image_url-6284-1520075993.jpg

 

What are you thoughts on these? 

Are you trying to accomplish a recessed look as well.



#12
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage

I was, yes.  I was looking at vacu-forming my own bezel. Mainly to learn how to do it, I mean, if I am going to spend $1k, I really want to get the most out of my money, and an education is priceless.


Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#13
3rd gen sinner

  • Slowpoke
  • PipPip
    • Group: 2016 Contributor
    • Location:Tampa FL.
    • Drives: 15 Kia Sorento, 86 Civic
    Garage View Garage

There you go. Thats awesome. Once these pieces come in and I like them on the car. I'll have the original lights just sitting here. 



#14
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage

Great. Let me know when it happens.


Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#15
geist1

  • Granny
  • Pip
    • Group: Members
    • Drives: 85 crx
Hate to jump in here and sound dumb, but I'm gonna do it anyway. Is there a difference between the sedan/crx bezels?

Sent from my LG-H910 using Tapatalk