Jump to content




Wtb... Crx Stuff


  • You cannot reply to this topic
11 replies to this topic

#1
iambhooper

  • Slowpoke
  • PipPip
    • Group: 2010 Contributing Member
    • Location:Either the Rock or VIR
    • Drives: 20 F150, 17 JGC Trailhawk, 90 DA Teggy STL Racecar, 92 DA Project, 92 DA Parts Car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car, I have issues!
I just acquired an 87 SI. it will see use as a part time DD and autox toy. Pending a visual check of it, there are a few things I will need:

27mm torsion bars
sway bars
Coilovers
Pulleys
Clutch set
seats... race or Honda
seat rails
passenger fender

Updated 2/4
hoop
greensboro, nc
20 F150, 17 JGC Trailhawk, 90 DA STL Racecar, 92 DA Project, 92 DA parts car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car... I may have issues!

#2
86hatchie

  • In the left lane
  • PipPipPip
    • Group: 2014 Contributor
    • Location:Greenville, SC
    • Drives: 86 Civic HB Si + 87 CRX Si
I have plenty of rails if u need them.

Tim

#3
Vicious

I got some of that stuff just text me 8634433238 I'll send a pm aswell but text is fastest way of getting ahold of me

(\ /)
(O.o)
(> <)
This is Bunny. Copy Bunny into your signature to help him on his way to world domination.


Success is about standing out, not fitting in.


#4
kedwards

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Port Charlotte, FL
    • Drives: '04 MINI Cooper, 2011 Honda Fit

I have some torsion bars and assorted decent seats, with rails. Various colors. I will check on other items next week.

http://www.redpepper...ic=37758&page=3


Keith A. Edwards
Suffolk, VA
1.75 1st gen. CRXs
former ECHC H5 Champion


#5
solorex

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Port Moody, BC
    • Drives: 1991 Honda CRX Si, 1987 CRX dx (project)

I have a DC Header and the passenger fender.  Shipping on the fender is going to be a bit pricey, but I have a box for it.



#6
iambhooper

  • Slowpoke
  • PipPip
    • Group: 2010 Contributing Member
    • Location:Either the Rock or VIR
    • Drives: 20 F150, 17 JGC Trailhawk, 90 DA Teggy STL Racecar, 92 DA Project, 92 DA Parts Car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car, I have issues!
Bump for updated needs
hoop
greensboro, nc
20 F150, 17 JGC Trailhawk, 90 DA STL Racecar, 92 DA Project, 92 DA parts car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car... I may have issues!

#7
Mc_duzy

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 1987 honda crx Si, 1987 honda crx hf carb
    Garage View Garage
-ISO/WTB/Willing to Trade-
For:
1987 Honda Crx Si Engine
and Parts,
(Cheap Or At Low Cost)
________________________

Hello, Dustin here; from North GA.

I Desperately Need Some Parts for My Rex In Order To Keep From Having To Just Sell It I, After All I've Done So Far, Had Done So Far, (or Lack There Of.. Ha.. smh..)
To My : '87 Model. CRX Si. First Generation.

To Make Operable, & To Drive Again..

Currently I Need:
---------------
•A Fuel Rail, and/or Fuel Injectors. (preferably the whole rail as my fuel is leaking.)

•A Head with the Internals, (Pistons, Rods, Camshaft,) To : A Stock d16a3, Si Motor {Or A, Entire D Series Engine, That I Can Put In My Honda and It Run. ..While, if possible, Avoiding Pricey Engine Swaps, Requiring Me to Upgrade Any... Harnesses, Knuckles, Axles, Suspension, etc. Or Other Costly Swap Parts, That I Am Currently Not In A Near Enough Stable Financial Position To Be Able To Afford At This Time, Or Have The Time/Place To Do.
•Intake Manifold
*(I don't believe I need this to get my Honda running again, but I know it wouldn't hurt to get a new one with an IACV on it)*

Thanks
Respectfully,

-Dustin M.
6786771237
*Located in North Georgia*


Sent from my SM-G930T using Tapatalk

#8
kedwards

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Port Charlotte, FL
    • Drives: '04 MINI Cooper, 2011 Honda Fit

I count 5 Si intake manifolds on my shelf with throttle bodies, fuel rails, but without injectors.  I haven't inspected their IACVs, yet. $30 each + shipping. Fresh pictures are here https://drive.google...b0E?usp=sharing


Keith A. Edwards
Suffolk, VA
1.75 1st gen. CRXs
former ECHC H5 Champion


#9
cirrux

  • a work in progress
  • PipPip
    • Group: Contributing Member
    • Location:Greenville, SC
    • Drives: 87 CRX 1.6i-16

Any interest in some EDM Taillights? They're in good shape, you can have them for free if you dont mind paying shipping costs. I need them gone and would like to see them put to use

 

https://imgur.com/a/uplddVE

 

Andrew



#10
iambhooper

  • Slowpoke
  • PipPip
    • Group: 2010 Contributing Member
    • Location:Either the Rock or VIR
    • Drives: 20 F150, 17 JGC Trailhawk, 90 DA Teggy STL Racecar, 92 DA Project, 92 DA Parts Car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car, I have issues!
No, im bailing on the Crx project.... all mu stuff will be for sale soon.

Sent from my SM-G920V using Tapatalk
hoop
greensboro, nc
20 F150, 17 JGC Trailhawk, 90 DA STL Racecar, 92 DA Project, 92 DA parts car, 86 Pontiac Fiero Gt, 70 MGB GT project, 73 MGB GT parts car... I may have issues!

#11
1985 CRX SI

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2011 Contributing Member
    • Location:Akron , Ohio 44305
    • Drives: 1986 CRX si
    Garage View Garage

I would be interested in those EDM tail lights if he is not.

 

Thanks Jeff



#12
cirrux

  • a work in progress
  • PipPip
    • Group: Contributing Member
    • Location:Greenville, SC
    • Drives: 87 CRX 1.6i-16

I would be interested in those EDM tail lights if he is not.

 

Thanks Jeff

 

Great, DM sent