wow thanks thats perfect! That should all come in very handy soon for me! Thanks for that!

I actually have been on that sight numerous amounts of times and they have a link to the sister sight which is the second gen sight. Unfortunately I havent found too much useful info on the sight with a ton of dead links...

To those of you who used the Weber conversion, what all was required in setting up the carb? Does it come with instructions as to what port is which and also I am new to carbs in general...does it needed to be jetted or anything? Plug and play? Im guessing its not so this should be interesting.

Thanks again!

Well I ripped out all of the boxes vacuum line by vacuum line to make sure I wasnt taking anything necessary out and now I have a pretty empty bay. It ran and was idling great then started to choke and die out. The carb is flooding really badly, the barrel will get like half full of gas so I am guessing a vent line or something shouldnt be capped and I capped it. But all in all I think the verdict is boxes are not needed the problem should get fixed either way since I am ordering a Weber soon...speaking of Webers, what is a good site to order off of?

Although its a different carb and generation I think that should help me out a lot. Those pics are awesome! Thanks!

I have searched around this site and a bunch of others with no luck. I am having 0 luck! I guess I can just rip everything out and post results if I dont hear anything by this weekend.

I will search around but I havent been able to find anything yet. I have removed box 2 and 3 because they were for emissions. So a ton of junk is now gone from the bay. State laws are non-existent here anyways. The car will have no cat either. Anyways, still need help with box one, if anyone has any experience please post!

Hello!
I am a newb to this forum but not new to automotive forums. I have been recommended to this site countless times from Honda-tech.com since no one is able to answer my questions. I know my car is not technically the right year or generation but I hope to find some info here.

I own a 1983 Honda Civic 1500 S. I am building it to be an auto-x car with my dad as a father son project. Goal is to have fun the first year with basic gutted interior, Weber carb conversion, basic suspension, possible racing seats, and new rims and tires. I am currently ripping all out of the emissions control stuff, such as the EGR system and anti-afterburn chambers. So with that out of the way here is my question...

What are these boxes and what do they do?
So I know these are called control box 1,2, and 3. I have found them in my Haynes manual but I have no idea what they are and what they do. Are they needed to make the car run? Are they emissions related? It would be nice to be able to take them out as they have a ton of vacuum hoses going in and out of them and the bay is cluttered. Any help would be appreciated and the pics are below:




The first pic is "Control Box 1" and the second picture is "Control box 2 and 3"

According to my vacuum diagram on the hood it says that both boxes 2 and 3 are for the EGR system...Seeing as how I already yanked out the EGR stuff I also pulled boxes 2 and 3.

Box 1 consists of :
Dashpot check valve
Cranking leak soleniod valve
P/J cut valve soleniod
Idle control soleniod valve
Control switch
a handful of check valves
Control switch
Vacuum holding soleniod valve
cranking soleniod valve

This is the list of things listed under #1 box on the hood of the car. Almost every single one of them pulls some kind of vacuum from the carb...Any info on removing the number one box would be appreciated again guys!

Ian