FYI, I have slotted Power Slot rotors for the 1g 'teg forsale, if you're not already set on Brembo. They can be found among my Forsale items at http://www.mullinator.com/forsale/
I also have Axxis Metal Master pads. Never installed them, so YMMV.
That said-- I saw a dramatic improvement in braking capability after I went to Porterfield R4S pads on my CRX. I highly recommend this street pad. -scott
2
Pads/rotors
Started by misfit_mafioso, Aug 11 2004 11:42 PM
31 replies to this topic
#31
Posted 18 August 2004 - 11:47 AM
#32
Posted 18 August 2004 - 12:41 PM
I will not use Beck/Arnley(sp??) rotors again! They heat checked and were grooved after 1 session. Brembos never had this problem even when i bedded new pads and rotors together. The Raybestos ST43 compound is great once it is bedded in. I could go deeper on braking than ever before at certain corners.
The pedal feel was good and pedal height never went away. It was always near the top even after 12 laps at Road America.
Bob
The pedal feel was good and pedal height never went away. It was always near the top even after 12 laps at Road America.
Bob