I'd go for a set, and a few buddie's of mine would prolly jump in an a set.
3
Torsion Bar Group Buy?
Started by blownintegra, Jul 08 2003 06:50 PM
57 replies to this topic
#16
Posted 09 July 2003 - 07:35 PM
87 CRX SI, Wide body, and still not running...RB25DET?!?!?!
74 260Z....going to get rebuilt soon....
07 Subaru outback...Daily Driver...
74 260Z....going to get rebuilt soon....
07 Subaru outback...Daily Driver...
#17
Posted 09 July 2003 - 07:37 PM
#18
Posted 09 July 2003 - 07:53 PM
#19
Posted 09 July 2003 - 08:17 PM
I think the problem is that we will have to all get the same size. I already have 26's, so I'd want to go to 29's for sure. Others want 27, 24, and 23. I'll see what I can do though.
"Toby, you are a thief of joy"
#20
Posted 09 July 2003 - 08:27 PM
Yeah, I just thought about that too. Maybe they have some in stock, and we can get 2 kinds.....
Let me know if you want me to try to contact them, or if you'll handle it..
If we need more people too, we can post on other crx sites too..
Thanks,
Mike
Let me know if you want me to try to contact them, or if you'll handle it..
If we need more people too, we can post on other crx sites too..
Thanks,
Mike
#21
Posted 09 July 2003 - 08:48 PM
I'm looking for something to improve the 87 wagon...I'm a little fuzzy on what exactly.
If these t-bars will work for my application I'm willing to spend up to $200 for new ones.
If these t-bars will work for my application I'm willing to spend up to $200 for new ones.
Come and see the violence inherent in the system! Help! Help! I'm being repressed!
#22
Posted 09 July 2003 - 08:48 PM
#23
Posted 09 July 2003 - 09:34 PM
One set of 27s.
JAKOB
JAKOB
Edited by boman, 09 July 2003 - 09:35 PM.
1987 Honda CRX Si 1.6 DOHC TURBO (ZC)
1999 Honda Civic Dx
Sold:
1999 Civic SiR
2002 Lexus IS300
1999 Honda Civic Dx
Sold:
1999 Civic SiR
2002 Lexus IS300
#24
Posted 09 July 2003 - 11:52 PM
This is bad timing for me. I am trying to save money for SCCA Solo II Nationals. After that I will have money free to buy suspension stuff. (Nationals are the first week of September)
...And I definatly want a set.
...And I definatly want a set.
#25
Posted 10 July 2003 - 01:14 AM
Consider me "in".
B16 in a 3rd gen, street driven, what size do you guys recommend?
26mm?
Let me know!
I have the credit card in hand. If an MO is required, that can be accomplished rapidly if necessary.
-Tomo
B16 in a 3rd gen, street driven, what size do you guys recommend?
26mm?
Let me know!
I have the credit card in hand. If an MO is required, that can be accomplished rapidly if necessary.
-Tomo
#26
Posted 10 July 2003 - 07:41 PM
We're getting good response here.
Maybe this can come off!!!
Thanks for the support on this idea.
Mike
Maybe this can come off!!!
Thanks for the support on this idea.
Mike
#27
Posted 10 July 2003 - 09:49 PM
#28
Posted 11 July 2003 - 10:38 AM
#29
Posted 11 July 2003 - 11:13 AM
#30
Posted 11 July 2003 - 08:27 PM
I just posted to some people on www.g1teg.org because they were interested in a group buy, and/or torsion bars too. Hopefully, they will respond here, to increase our numbers.
Things are looking good for about 25-30 sets. If we can get some other people involved too, we might be able to get 40.
I any of you post on other CRX boards, maybe you all can chime in about this, and we can see what type of numbers we can generate.
Again, thanks to all.
Sincerely,
Mike
P.S. I'll leave calling up to RPR, because this is his board, and he said he'll look into it. If I need to call or anything, I will be willing to do some phone work.
Things are looking good for about 25-30 sets. If we can get some other people involved too, we might be able to get 40.
I any of you post on other CRX boards, maybe you all can chime in about this, and we can see what type of numbers we can generate.
Again, thanks to all.
Sincerely,
Mike
P.S. I'll leave calling up to RPR, because this is his board, and he said he'll look into it. If I need to call or anything, I will be willing to do some phone work.