Jump to content




Zc In 1g Rex


  • You cannot reply to this topic
3 replies to this topic

#1
S.C.A.R

  • Granny
  • Pip
    • Group: Members
    • Drives: 86 CRX si
ok I have an 86 Si and I wanted to know what all am I gonna need for the ZC Brown top swap also is this swap just as easy as swapping a ZC into an 88 Rex? How long am I looking to take with it on average? thanx. unsure.gif

#2
crxmobber

  • Mobbin Clean
  • PipPipPipPip
    • Group: Contributing Member
    • Location:Lake Stevens, WA
    • Drives: 87 CRX Si, 85 CRX Si, 98 prelude, 5th Gen VFR, WRX
    • Image Gallery
first off the whole swap can be done in a weekend if you have all the tools,supplies and parts you need.the swap is basically direct with few moifications. get a brown valve cover zc or an 86-87 integra engine to do the swap. use the us 86-87 integra tranny,intake manifold/tb (for zc) ,vacuume box,ecu,axles,clutch,engine harness,knuckle spindle assembly and anything else you can think of.you need to do some wiring mods but the rest is cake.

SportInjectedClub

#3
RexKrazy

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2009 Contributing Member
    • Location:Virginia Beach, VA
    • Drives: 1986 CRX Si/1987 Integra LS Hybrid
if you get the 86-7 ls manual tranny motor and ecu, there is no wiring trouble...maybe a few different connectors.
Tony Palumbo
'86 CRX Si ZC

#4
TurboG1Rex

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Roseville, Michigan
    • Drives: 1986 Honda Civic CRX
this is pretty much everything you need to know. its good for all 86 and 86 swaps. its what i used when i did my swap.

http://hybrid2.honda...ch/westech.html
1986 Honda Civic CRX SI
86 D16A1 and BOOST!!!!

Soo Much Boost, Soo Little Time.