I've got a jumper harness with extension etc that plugs into an OBDI ecu and into an OBDI dizzy. It is very basic and does not have provisions for VSS or o2 sensor. It was used in my race car.
1
B Series Harness For 1St Gen Crx
Started by anthonyfig21, Nov 10 2014 10:47 PM
22 replies to this topic
#16
Posted 17 November 2014 - 09:18 PM
#17
Posted 17 November 2014 - 09:20 PM
I've got a jumper harness with extension etc that plugs into an OBDI ecu and into an OBDI dizzy. It is very basic and does not have provisions for VSS or o2 sensor. It was used in my race car.
1985 CRX Si H2 Racecar
2000 Subaru Impreza 2.5RS with a WRX swap
2000 Subaru Impreza 2.5RS with a WRX swap
#18
Posted 17 November 2014 - 09:53 PM
#19
Posted 18 November 2014 - 02:28 PM
Anyone know how long it takes for the harness to be made and delivered?
it does not take very long, i ordered on a monday and it came in less than a week.
they mass produce the budget obd1/2 harnesses. all they custom make are the chassis side pigtail. which does not take much time.
#20
Posted 18 November 2014 - 06:55 PM
depends on how backed up they are and with the holidays and it being most peoples "build" time, I ordered a simple jumper harness for my S2k cluster and that took a month... or maybe I just had the worst luck in the world and had to wait ages for mine to get made... :/
Dark Side of the Power........
Wheels
QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)
Wheels
QUOTE (RARECRX @ Jun 26 2009, 06:55 PM)
The ONLY BMW's I like are (Beautiful Mexican Women)
#21
Posted 18 November 2014 - 07:34 PM
I'd really like to see how you got the s2k cluster in, that's definitely something I want to throw in to my rex.
#22
Posted 18 November 2014 - 08:18 PM
I ordered harness from Rywire friday and it came in today... I guess the fact that I live about 25 minutes away from where they are located helped out
#23
Posted 18 November 2014 - 09:33 PM
You can get fatter gauge cables with installed terminals and ground straps at napa. Ive got a 2/0 negative cable and an engine ground I made myself (but plan on running 2/0 braided)
grimms mom