45 replies to this topic

[odz-fab]

my first 3g civic... 

2l b series.



gt3076r and im running it on kpro(more on this later)

I got the wilwoods in today and and ordered the hasports and BC coilovers are on there way

Edited by odz-fab, 06 February 2016 - 09:16 AM.

[PuddleSkipper]

You have to go through a third party like photobucket and then paste the link. Are you turboing the original motor?

[odz-fab]

thanks I figured it out, had to turn off the bbc code mode button. wasn't allowing me to paste the links copied from photobucket.

not the original engine no.

Edited by odz-fab, 06 February 2016 - 09:21 AM.

[PuddleSkipper]

Nice! what are you shooting for for horsepower?

[odz-fab]

500hp. This setup is good for 450-600. I imagine that would more than enough for this little car. Boost by gear will help a lot . Got the brakes. Install was easy. Very straight forward.

[Aren D.]

This thing is an animal!


Sent from my iPhone using Tapatalk

[odz-fab]

More parts arrived ....... Total bushing kit

And my fuel rail

[odz-fab]

new wheels...team dynamics..went with a 15x7 30 offset... and yokohama s.drives in 205/50-15

[odz-fab]

In case you were wondering what to do with cd tray now that CDs are old news...

And a red stitched spoon/momo wheel on a quick release hub. I opted to use the momo horn button

[odz-fab]

Hasports came in. I was pleased to see they did alil more to driver side mount. Not looking so homemade anymore

[f20bcivic]

Hey man nice build i also orded the bs coilover set. What is the Part number for the willwood breaks? Im interested in those? They arw diect fit or any mods needed on the knuckle? Also what axle set up are you going with if you dont mind me asking?

[odz-fab]

Wilwood 140-8695 is what I have.100% bolt on. Mines is stock si and pedal feel is great. Axles I may just go with driveshaft shop 2.9 axles.. $800 but they will hold 500hp

[f20bcivic]

Cool im going to order those brakes in a bit they will go well with my wildwood master booster delete kit. Also im going to run my luck on the axles cause I had oems b16 axles on my crx when I had the 700hp set up and they held up well no click or rips so im going with the 87 integra oem axles for now before I get anything custom.

[CSPCRX]

Thats a nice brake setup. Looks like they have three different size options, 4 and 6 piston calipers and slotted and drilled rotors. Curious how much less they would weigh than a stock Big Brake options. 6 piston kit may be too much stopping power and just lock up. Wish there was a kit like this for the rear that would work on the stock rear axle.

[f20bcivic]

There is a kit that works on stock rear axles! I ordered the Fronts like he has and did some research I found these will work with the stock drum set up hub in the rear Wilwood 140-10210