Jump to content




Civic Newbie Kzoo Michigan


  • You cannot reply to this topic
11 replies to this topic

#1
Absinthminded

  • Granny
  • Pip
    • Group: Members
    • Location:Kzoo, Michigan
    • Drives: 1984 1500s 1990 GSX 1992 240sx
Hi, I just got the link to this site. I'm from Kalamazoo Michigan and I'm a proud new owner of a 1984 1500s. I know nothing about this car or Hondas in general. I bought this car with out looking at it off of ebay a while back. One of the previous owners replaced one of the fuesable links with speaker wire. Nice! A quick trip to Napa fixed that one. The car will start as long as I hold the key all the way turned right to the start position. Once I let go and the key turns left to the run position, the car dies. I think it is loseing spark. Maybe its a faulty ignition switch? I'm working on it. Let me know if you can shed any light on this problem. Thanks, D







#2
Absinthminded

  • Granny
  • Pip
    • Group: Members
    • Location:Kzoo, Michigan
    • Drives: 1984 1500s 1990 GSX 1992 240sx
10 views and no input....?

#3
JEFFtheJ00la

  • i was the first one to rent this monte, lol
  • PipPipPipPipPip
    • Group: Contributing Member
    • Location:nevada, Tx (bfe)
    • Drives: 86crx soon to be b20b, 96Grand am sedan(9.22 1/8th), 79Trans am 403 to 350 in prog. , 03Dakota DD, 86 civic sedan si swap dd
    • Image Gallery
    Garage View Garage
yes replace your ignition switch.




nice car. ive only seen one 1500s and it was in the yards. it was white too.

SportInjectedClubvisit my myspace SAHCR Member

if your offended by anything i post, you need to seriously get a life

#4
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
Yep, replace the ignition switch, this gets wore out. to much weight on the keyring after 20 years. cool.gif Nice, now fix that rust and reset that rear bumpercover. laugh.gif
Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#5
Screech

  • Project CI2-VIC Team Lead
  • PipPipPipPipPip
    • Group: 2012 Contributor
    • Location:Eastern NC
    • Drives: 16 Ford RS, 84 Civic 2000S (B20Z2), 98 Civic EX
    • Image Gallery
    Garage View Garage
Ignition switch as stated. Easy to replace.

I miss my 84 1500S, I moved to the `86 Si for the sunroof and the FI (makes my swap easier). I wanna see pics of the interior. As BP stated take care of that rust.

Screech
------------------------

16 Ford RS (2.3l, DS)
84 Civic 2000S (B20Z2 2.0l, SMF)
 


#6
Absinthminded

  • Granny
  • Pip
    • Group: Members
    • Location:Kzoo, Michigan
    • Drives: 1984 1500s 1990 GSX 1992 240sx
QUOTE (Screech @ Aug 9 2006, 07:41 PM)
Ignition switch as stated.  Easy to replace. 

I miss my 84 1500S, I moved to the `86 Si for the sunroof and the FI (makes my swap easier).  I wanna see pics of the interior.  As BP stated take care of that rust.

I took the ingition switich out and found the the contacts were scourched and one of the little springs was welded in a curshed position. I scraped the contacts and popped the spring apart and put it all back together and she starts and runs. I did order a new switch anyway. Today I pulled the alt. only to discover that the housing is cracked and it is completely siezed up. One of the fuseable link for the ing. was replaced with a piece of speaker wire and that was burnt too. I think the alt dieing burnt the link. When they replaced the link with wire that burnt and fried the ingition switch. It was hot wired too. It just never got fixed right the first time. Its all jerry rigged up. Two of my brake lines are crimped off at the master cylinder! Does anyone know where I can find a right front fender and front bumper, headlight bezzel? I'm working on getting all the parts to do a tune up but i want to check the compression first. I'm going to have to replace all the breaks too! yeah Anyone from around the Kalamzoo-Michigan Area?

#7
tom91ita

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 1st gen crx si's and 2nd gen si's
check out u-wrench-it on the north side of town about every 2-3 weeks. it only costs a dollar for admission.

i've made some good finds there and came up empty handed somtimes as well.

#8
Absinthminded

  • Granny
  • Pip
    • Group: Members
    • Location:Kzoo, Michigan
    • Drives: 1984 1500s 1990 GSX 1992 240sx
QUOTE (tom91ita @ Aug 23 2006, 09:51 PM)
check out u-wrench-it on the north side of town about every 2-3 weeks.  it only costs a dollar for admission.

i've made some good finds there and came up empty handed somtimes as well.

I take it your from kalamazoo? Are you on kzoorice? I don't have much time to research all of what I can do with this car, mods and swaps and such. I also might be getting a 1983 1500s soon.
----Has anyone ever bought stuff from The Honda parts Store? I found it when I did a google search. Whats a good place to do business with?

#9
Madkore

  • Leadfoot
  • PipPipPipPipPip
    • Group: 2014 Contributor
    • Location:Los Angeles, California, USA
    • Drives: 1984 Honda Civic Si - For smiles and laughs, Original Owner, 1966 Ford Mustang - 5 speed trans, 4 wheel disks, 1968 Ford F250 - Big Ugly
    • Image Gallery
I have an 1984 Civic S.

I bought it in May, 1984.

I did paint the lower half White, so it looks like an Si without a Sunroof.

The 1984 is much better than the 1983.

And if you think finding parts for a G3 Civic is hard, try looking for G2 parts.

If anything, get another G3.

Edited by Madkore, 25 August 2006 - 02:36 PM.

You're Mad!

Well thank God for that, 'cause if I wasn't, this would probably have never worked.

Captain Jack Sparrow

#10
tom91ita

  • Slowpoke
  • PipPip
    • Group: Members
    • Drives: 1st gen crx si's and 2nd gen si's
check out this thread for OEM parts:

http://www.redpepper...topic=26906&hl=

lately i've used:

http://www.hondapart...honda_parts.php

most have ~20% off list pricing.

Edited by tom91ita, 25 August 2006 - 03:12 PM.


#11
Hollowman

  • Torsion Bar Groopie..
  • PipPipPipPipPip
    • Group: 2015 Contributor
    • Location:Los Angeles, CA
    • Drives: 1986 Civic SI w/ ZC, 2002 S2000
    • Image Gallery
QUOTE (Absinthminded @ Aug 23 2006, 02:34 PM)
Does anyone know where I can find a right front fender and front bumper, headlight bezzel?


Check out the Classifieds.. IIRC 3gencivic is selling a few of those headlight surrounds.. Nice project... Glad you saved that one.. White 3G's are great but I'm biased since I have a white 86 SI wink.gif .. Good luck and welcome to the board.. cool.gif
RIP Block# D16A12011451.. It will be missed..

James Bond (Diamonds are Forever): "That's a nice little nothing you're almost wearing. I approve."


Posted Image

#12
Hollowman

  • Torsion Bar Groopie..
  • PipPipPipPipPip
    • Group: 2015 Contributor
    • Location:Los Angeles, CA
    • Drives: 1986 Civic SI w/ ZC, 2002 S2000
    • Image Gallery
Here's the link: 3gencivic.. He's a good guy and a great seller... cool.gif
RIP Block# D16A12011451.. It will be missed..

James Bond (Diamonds are Forever): "That's a nice little nothing you're almost wearing. I approve."


Posted Image