Jump to content




! Mega Parts Sale !


  • You cannot reply to this topic
6 replies to this topic

#1
maan1986

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:DFW, TX
MEGA PARTS SALE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!























    •High performance transmission - rebuilt, 0 miles, custom 4.993 final gear, OPM LSD $$PM ME SOLD
    •5pt Harness $50 SOLD
    •Starter $20 -SOLD
    •ARP head stud kit - used, good shape, $40 -SOLDDDD!!!
    •Sylvania silverstar headlights $40 SOLD
    •Stock spec ign wires $15 SOLDDD!!!
    •Moroso 5qt oil pan, alluminum, has a hole in it that can be repaired... $50 -SOLD
    •PLX Dm-5 wideband 02 sensor w/ afr gauge $225 SOLDDDDDD
    •Oil catchcan $15 SOLD
    •Cam sensor on exhaust cam $20 SOLDD
    •Distributor #1 SOLDD
    •ZC head - milled .055 -> 10.8-11:1 compression, slight porting, inc cam caps & rockers $150 SOLD
    •Gude cam shafts - race spec camshafts, lumpy idle, top end power $200 SOLD
    •Stock transmission - excellent cond, no grinds etc $150 SOLD
    •ZC cam shafts - good ole ZC cams $150 SOLD

    •Suspension tech rear sway bar $80 Pending
    •AEM adjustable cam gears - 5bolt design, no slippage worries $180 for the pair Pending
    •Gude ported, TB opening enlarged Intake manifold w/ enlarged bullfrog TB $170 Pending

    •Web camshafts - race spec camshafts, lumpy idle, very strong midrange $200
    •Alluminum racing radiator - griffin racing rad, highflow and efficient cooling - comes w/ 2 slimline fans w/ connectors to hook up to the stock wiring-includes hoses to hook up to the D16A1...you'll need to make your own brackets $200
    •g1teg intermediate shaft 5spd $20
    •Gude racing spec head - milled head, extensive porting job, enlarged ports, 11:1 compression, very clean..inc cam caps, rockers etc $200
    •Stock head - oem inc cam caps & rockers $50
    •Stock camshafts - good as a regrind core $30
    •Distributor #2 $80
    •MSD 6A multiple spark discharge unit w/ modified MSD dizzy cap & MSD coil and wire $160
    •Cometic MLS headgasket $80
    •Optima redtop battery $80
    •Stock intake manifold $40
    •ITB setup w/ adapter, hondata heatshield gasket, adjustable fpr, fp gauge, etc etc $500
    •D16A1 block w/ internals, alternator, oil pan, flywheel, pulley...good engine, ran strong, could throw a head on it and go or rebuild it and make it into a monster..high mileage $60
    •Stock ECU $40
    •Spunkster modified 88/89 ecu, chipped, socketed, serial port allows datalogging, comes w/ serial to usb cable $140
    •Ostrich EMU...allows on the fly tuning of your ecu when used w/ turbo edit $150
    •Autometer monster tach 10k rpm bitches vtak $100 GET YA VTAK HERE
    •Gauge set water temp, oil temp, oil pressue $100


MORE PARTS ON THE WAY
IF ITS NOT LISTED, I MAY HAVE IT - JUST ASK

ALL PRICES OPEN TO REASONABLE NEGOTIATION

NO LOWBALLERS

SERIOUS BUYERS ONLY PLEASE

PRICES DO NOT INCLUDE SHIPPING

PM ME FOR SPECIFIC DETAILS AND PICS OF THE PARTS YOU WANT

WILLING TO DO PACKAGE DEALS IF YOU BUY MORE THAN ONE PART

Send me a PM or email me...

Papa needs vacation money...

PLEASE NOTE THESE ARE D16A1/Integra PARTS


Hey everyone, I will be overseas 7/28 and returning 8/22 on business / pleasure trip. If you are interested in parts let me know ASAP, so I can send them ASAP, otherwise it will be until near September before I can resume selling. Thanks.

Edited by maan1986, 11 July 2008 - 07:50 PM.


#2
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
How long has that battery been setting in the floor?

Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#3
staticchmbr

  • Work in progress
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:south eastern, PA
    • Drives: 2x crx in the rust graveyard, 87 crx si (building), 2004 wrx
    Garage View Garage
pm'd about pan and arp's
valvecover.gif
87 crx si (in pieces)
If you don't live for something, you'll die for nothing.

#4
importzero

very interested in the arp struds and the moroso 5qt pan
turbo zc !!!!!!

#5
JU5TIN

  • trying to get back in the car
  • PipPip
    • Group: 2012 Contributor
you have what looks to be a 4-2-1 exhaust in the picture but it is not listed, how much? and will it fit my d15a3?
and also would the one of the web camshaft fit a sohc 1.5 12v?

Justin

#6
badpenny

  • tinker, tinker....BOOOOOOM!!!! then I run around
  • PipPipPipPipPipPip
    • Group: Contributing Mod
    • Location:Hurst, Texas
    • Drives: Don't, because they don't run and I am a crappy mechanic.
    • Image Gallery
    Garage View Garage
I believe all he has is DOHC parts. No, sadly the 4-2-1 header won't.
Honda, because it's hard to look baller in your mom's Volvo.Posted Image 
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.

#7
jedi420

  • Slowpoke
  • PipPip
    • Group: Banned
    • Location:plano,tx 75074
    • Drives: 86 civic with zc d16 brown top
    • Image Gallery
what year d16a1 motor you have?