Cbreiter

I'd do the timing belt if it hasn't been done.

Got them finished. 10 sets available currently.

I put a '96 seat in my '85 sedan. Actually didn't take a lot of modification. The inside only took a small bit of work with the die grinder. The outside needed the rear mount cut off the old seat and bolted in place of the flat one. Works good, but I find the seat sits a bit higher than the old one.

Version 2 of the top flanges. Gotta wait for the bottom ones to get cut yet.

I'm getting some more cut, I'll let you guys know when they're done! These ones will have 3/8" thick flanges that go on the block, opposed to the original set which was 1/4"