46 replies to this topic

[Airgazm86]

cnc right mirror delete, hmmmm billet window cranks is a good idea...

I'd also like a mirror delete, anodized black with a machined RPR logo.

You can use universal billet window cranks for our cars. I have a set on my 3G that I bought from a mini-truck site and they use set screws to hold them to the splined shafts.

[ea_hatch]

i would get a set of the mirror deletes...make them for both sides

[cbstdscott]

The HF had a right side mirror delete. They are available from your local junkyard. A left side (USDM Driver's side) would be handy for those of us considering replacing the barn door mirrors.

Scott

[badpenny]

BTW, saw Nate today, he's heading to Vegas.....to get married.

I have so much to say to that. Anyways. Best of luck to him i guess.

[alexm86]

Battery Tie Down and Billet Front Knuckle.

Maybe some billet brackets for the engine bay-like a throttle cable bracket when an Integra throttle body is used on a stock intake manifold.

A coil mounting bracket for aftermarket coils. I have an MSD Blaster SS mounted to the fender.

I can make the drawings.

[Aren D.]

Rear axle locks would be sweeeet.

[zakats]

Rear axle locks would be sweeeet.

you must've missed the discussion on why axle locking is bad... then again all I remember from it is that people smarter than I agreed on it.

whatever ya do, I would want to see peppers cut in em!

[4N2NR]

Some seat frames that look like the CR-Z concept's:

[1gcvcb18]

i would get a set of the mirror deletes...make them for both sides

Now this i like for my 3 gen when i take her to the track to take the mirrors off. Less drag and loose some weight.

[d15a3power]

+4

I would agree that having an adaptor plate would indeed be nice. It would give thousands of 1st Gen CRX's the ability to run a distrubitor that we can tune the spark with. Add a ECU and baby-baby, that would be SWEET. Now, just bring it in under (read way under) that $350 that the other guys wants for it and I'm grabbing my debit card, NOW.

ANd once a few of us use them, there will be a host of others to convert as well.


JMHO


Donnie

This sounds like the right project; anybody willing to go out on a limb & draw (CAD) this thing? I can assure you that 1) the part will match the dwg. 2) I'll give the person that comes up w/ a dwg a free part, esp. since they're testing the prototype! I've never seen this part personally...

I'm still thinking of other parts. The big barrier is making a drawing from the part.

[zakats]

I can do the cad if someone gives me the specs.... or even better- an adapter plate for me to measure.

<-drafting since high school

[duckorbleed]

i could send you a copy of mastercam d15a.....

email me, we'll talk.


<---- graduated ntma training centers.....went to HAAS Factory Outlet for certification as a CNC Programmer


way to go !!!

[badpenny]

zakats wants a custom horn button

[DarkHand]

Was it GTPilot with the distributor adaptors? He was involved in a discussion about them at the very least way back in the day.

They were hugely expensive, but they were cut from BIG chunks of metal, like a 5"x5"x2". I'm sure that had something to do with the price.

EDIT: Ok I found it, not GTPilot, it was:

DILYSI Motorsports

Edited by DarkHand, 26 February 2008 - 05:42 PM.

[d15a3power]

I have the ability to do the drawing, the software is at school. Just no prototype part to measure. The instructor will help me manufacture the part but I need a dwg.