hey all,
well after a few bad online purchases (broken head steads, stripped spark plug threads, worn cam journals) i need a GOOD SI head.
Here is what i would like:
0: P&P or shaved....depends on price
1: Good Intake and exhaust studs...not broken off....dont have to be installed.
2: Good Spark Plug threads, not stripped
3: Good camshaft journals
4: Good valve guides and seals...not necessary though.
5: No valves or springs, unless aftermarket
6: No camshaft...have plenty of those
7: Preferrably clean, but i can clean it.
Let me know what you have and what you need for it. Willing to spend a decent amount, but nothing crazy
0
Wtb: Si Head
Started by duner, Dec 23 2007 08:22 AM
2 replies to this topic
#1
Posted 23 December 2007 - 08:22 AM
#2
Posted 23 December 2007 - 08:05 PM
I've got the good head from the d15a3 that I pulled out of my racecar. It was new 10 years ago. I've had no problems. I'm doing a B series swap, so whatever you want, I can remove and sell. This was SCCA IT legal. PM me.
jack
jack
#3
Posted 24 December 2007 - 11:36 PM
I have an 85 CRX Si head with no camshaft. 138,717 miles, completely stock in 100% working order. The only flaw is in the throttle body, TPS sensor.
All as you requested except #0.
I'll give you the spare camshaft: its from an 87 Civic Si. Or not.
Off the car for 2yrs., stored wrapped up in a box.
All as you requested except #0.
I'll give you the spare camshaft: its from an 87 Civic Si. Or not.
Off the car for 2yrs., stored wrapped up in a box.
May thru November only.
Rust never sleeps.
Rust never sleeps.