The shims that look like body shims are still available. I was actually thinking of using some of the 1/32 to find out how much I need to get the camber how I want it. Then make some flap stock plates to go in permanently.
245S
#16
Posted 19 November 2020 - 06:56 PM
Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
#17
Posted 01 December 2020 - 10:49 PM
Got tires mounted today and spacers for the front showed up. Need to pull the studs on the spacers and finish the brake kit so I can mount them up. I am excited about how well these are going to look.
Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily
#18
Posted 03 December 2020 - 08:54 PM
some pics next on the car. Got the studs pressed out of the spacers just need to wrap up brake project.
Untitled by Victor M, on Flickr
Interesting how a 205 is so close to a 225. You would think 20mm is 20mm. This is the 205/50 Proxos that I have run for years, square setup, vs the AR1 225.
Untitled by Victor M, on Flickr
Now the fronts vs rears. 245 AR1 vs 225 AR1
Untitled by Victor M, on Flickr
Victor
86 K24 Powered CRX SI (SMF Solo2, HPDE-4 NASA & TA-A Time Attack
85 CRX DX totally original
07 Harley FXST Softail
2021 Tacoma Tow/Daily