Jump to content




'85-SI's Content

There have been 53 items by '85-SI (Search limited from 29-March 23)


By content type

See this member's


Sort by                Order  

#429879 Parting Out A 1985 Crx Si And Hf

Posted by '85-SI on 26 February 2009 - 06:23 PM in FS

Got a passenger plastic door garnish?



#429763 Crx Digi Dash & Surround

Posted by '85-SI on 25 February 2009 - 11:06 PM in FS

QUOTE (GENONE @ Feb 25 2009, 05:57 PM) <{POST_SNAPBACK}>
there's info on here how to fit them... search and you shall find smile.gif


No freebies here sad.gif alright I will search... haha!



#429693 Crx Digi Dash & Surround

Posted by '85-SI on 25 February 2009 - 04:13 PM in FS

What's the story behind getting these to work in the USDM car?



#429634 Anyone Interested In A Built Ew?

Posted by '85-SI on 25 February 2009 - 02:20 AM in FS


Yeah it might be easier to sell if you post even a tiny bit of information about what you are selling???



#429568 Loud Fuel Pump!

Posted by '85-SI on 24 February 2009 - 06:29 PM in 1G CRX


Yeah mine is loud too so I would hav to say you are probably fine... I like it though, let's me know the pump is coming on. smile.gif



#428734 Nos Dc Sports Header 84-87 Crx/civic

Posted by '85-SI on 18 February 2009 - 10:17 PM in FS

*payment sent*



#428730 Rear Brakes(aka A Topic That Has Been Beaten To Death)

Posted by '85-SI on 18 February 2009 - 09:59 PM in 1G CRX

i'm gonna remove the brakes all together and just stop with downshifting... plus it's a huge weight saving maneuver. smile.gif



#428729 Rpr Hoodies

Posted by '85-SI on 18 February 2009 - 09:46 PM in Off-Topic

One hoodie here, XL please...Paypal Sent...


smile.gif



#428708 "official" Rpr T-shirt

Posted by '85-SI on 18 February 2009 - 06:54 PM in Off-Topic

I like the idea of full back and center chest logo, I have a few shirts like that and it looks good???



#428585 Nos Dc Sports Header 84-87 Crx/civic

Posted by '85-SI on 17 February 2009 - 09:56 PM in FS

I'm ready to install it so at this point a box is pretty important too, haha smile.gif



#428418 Nos Dc Sports Header 84-87 Crx/civic

Posted by '85-SI on 17 February 2009 - 01:55 AM in FS

box it up and send it my way...couple questions though, where is the o2 bung on the DC; and is this a one piece or two piece header? Doesn't really matter, just wondering...



#428284 Rear Disk Brake Swap...

Posted by '85-SI on 16 February 2009 - 01:39 PM in FS



I've got a near complete disk brake swap for the 1g. Calipers, rotors, backplates, hoses, teg proportioniong valve, and all the hardware except for the backing plate studs (integra's are a little longer, and you need em). No trailing arms or hubs, use your existing. Make me an offer and if the price is right I can probably swing by the junkyard and snatch up the studs? Your call.

Edit: parts are in san diego, CA. Prefer local since shipping would be pricey.



#428146 Si Sunroof Replacement

Posted by '85-SI on 15 February 2009 - 06:51 AM in 1G CRX

i have a perfectly good roof panel that I will sell you as soon as my CF one arrives!!! smile.gif



#427714 Car Jumpy In 1st Gear Bad...motor Mounts?

Posted by '85-SI on 11 February 2009 - 01:48 PM in 1G CRX

No the engine is fine and it doesn't do it all the time it will only do it if the engine is at the correct RPM to allow the drivetrain to be right at freewheel, right at the edge of throttle and none while rolling. It's like there is slop in the drivetrain and it bucks back and forth. It's kind of hard to explain obviously.



#427713 Rear Brakes(aka A Topic That Has Been Beaten To Death)

Posted by '85-SI on 11 February 2009 - 01:44 PM in 1G CRX

and the stupid teg disks make your rear track width wider...I'm still bent about that. Stupid offset, stupid car, stupid disk brakes... haha!! Ok all better now smile.gif



#427124 Car Jumpy In 1st Gear Bad...motor Mounts?

Posted by '85-SI on 07 February 2009 - 09:38 PM in 1G CRX

QUOTE (zakats @ Feb 6 2009, 03:03 PM) <{POST_SNAPBACK}>
sounds like it, pick up a couple tubes window weld and take care of it when you're doing the other work



You talking 3M window weld fast urethane...That was my next question...so no need to ask now??

Thanks



#426979 Car Jumpy In 1st Gear Bad...motor Mounts?

Posted by '85-SI on 06 February 2009 - 05:42 PM in 1G CRX

Seems like I'm all sorts of busy here lately so here's another question for the masses. The car wants to jump and buck if I so even blip the throttle at al, it's almost impossible to get back to smooth driving without clutching it. Does this sound like worn out motor mouts. If not, any ideas. I'm going to be installing a 6 puck sprung and a lot of motor work, so I figure I should get that situated first.


Thanks all...



#426750 1g Rear Disk Issue?

Posted by '85-SI on 04 February 2009 - 07:45 PM in 1G CRX

QUOTE (Old School REX @ Feb 4 2009, 03:43 PM) <{POST_SNAPBACK}>
What offset wheels are you running? I have 15X8's with a 38mm with no problem with rolled inner lip. Another question, if you are "tucking" a 13" wheel (or tire) you must have some serious drop going on... What size tires are they? Suspension travel is limited as it is, too much drop on the back = very bad thing in even spirited driving...

I won't try to pull you away from going back to drums however... I need a set of Teggy e-brake cables, you got them? I want them... biggrin.gif laugh.gif wink.gif



Not sure of the offset at this point...did those wheels come in different offsets? Im too lazy to pull one to look right now. And no the cables are the one things I didn't get off the donor...too much work for an e-brake, haha...



#426748 Wtb In Ct For A B20b Swap, Teg Hubs And Brakes Aphb, Torsion.

Posted by '85-SI on 04 February 2009 - 07:33 PM in WTB

QUOTE (Airjockie @ Jan 31 2009, 06:32 PM) <{POST_SNAPBACK}>
OK, so I seamed to have snagged a car from a buddy that needed money to move. I probably paid too much, but I guess it will work. Anyways...

I will need:



86-89 teg front hubs and brakes, hell, might as well toss on the rears as well....who's got some?

A torsion bar set... I might just get the Upgrade Motoring 29mm one, unless someone has something.

I'll need a sweet adjustable pan-hard bar.

camber plates.


and I'll add more to the list when I decide what else I want...


I've got a copmplete rear brake set, disks, calipers brackets, hoses...just don't have the teg hub bolts that you will need...i've also got stock torsions if you want em...lemme know if you want any of this???



#426715 1g Rear Disk Issue?

Posted by '85-SI on 04 February 2009 - 02:16 PM in 1G CRX

It rubs driver bad, and passenger not as muxh but still really close... I'm going to make this whole install that much easier and go back to the drums. I like my ride height so that's not an option and I like the 13" 10 spokes as well. I will just run some HF drums and save the weight. Not the end of the world and it seems as if its the cheapest way out of this little situation. A do appreciate all the info though. The disks aren't that important that I'm gonna reinvent the wheel to get them to fit.



#426622 Rear Panhard Bar Questions (kinda)

Posted by '85-SI on 03 February 2009 - 07:50 PM in 1G CRX

firstgencrx...are you still making adj. panhard bars for sale? If so PM me please, I tried to PM you and it wouldn't let me. Thanks



#426620 1g Rear Disk Issue?

Posted by '85-SI on 03 February 2009 - 07:34 PM in 1G CRX

I'm rolled... but it seems to not be enough...could it be that i'm running rex hubs, axles and trailing arms with teg disks..., should I be running the teg hubs and/or axles as well. Does it make a difference?



#426561 1g Rear Disk Issue?

Posted by '85-SI on 03 February 2009 - 10:21 AM in 1G CRX


With 450lb springs and rancho rs9000s I can rule out soft suspension. Its simply a track width issue. I drive the thing about as low as it will go without destroying the thing. Short of reinventing the wheel, I think going back to drums is my quickest solution. I appreciate all the help, and I should have known with the need for longer wheel studs!!! I didn't put two and two together until the car was rolling... Oh well, always learning! smile.gif



#426529 1g Rear Disk Issue?

Posted by '85-SI on 03 February 2009 - 01:10 AM in 1G CRX

i'm on 13" honda ten spoke w/ 185/60's. i'm dropped to tuck about an inch of tire. It rubs both sides ever so slightly.



#426315 1g Rear Disk Issue?

Posted by '85-SI on 01 February 2009 - 03:27 PM in 1G CRX

as i suspected...looks like I'm going back to drums.... I will have to find some hf drums...