Once the new ignition switch is in place and it's running again, I just hit $6000.00. It was about a 90/10 split in favor of cosmetic changes over mechanical repairs. Everything just keeps running really well...did I just curse myself by saying that...
2
How Much $ Is In Your Crx's?
Started by down4ce, Aug 03 2004 06:37 PM
46 replies to this topic
#31
Posted 04 August 2004 - 08:44 AM
#32
Posted 04 August 2004 - 10:09 AM
According to my garage list, I am at $6225 CDN, I've probaly put another $1000 into it since then, or will have in the near future...
"Toby, you are a thief of joy"
#33
Posted 04 August 2004 - 02:02 PM
I'm not as mechanically inclined as some of the guys here, so I tend to spend a little more on stuff...but that's how it goes...I want my car to run for a long time!
So far:
87 HF - $575
Front Brakes (new pads & rotors) - $185
New lower control arms on both driver & passenger side - $450
Sony tape deck - $5 (40w per channel!)
Rear speakers - free!
To come:
New clutch (incl resurface flywheel)- $300
Exhaust - $300 (roughly...this will include new cat)
Tune Up - cheep (since this is where my mechanical skills excel!)
Compression check, vacuum leak check, $60
I'm sure there is more I want to do, but that's my budget for the fall!
So far:
87 HF - $575
Front Brakes (new pads & rotors) - $185
New lower control arms on both driver & passenger side - $450
Sony tape deck - $5 (40w per channel!)
Rear speakers - free!
To come:
New clutch (incl resurface flywheel)- $300
Exhaust - $300 (roughly...this will include new cat)
Tune Up - cheep (since this is where my mechanical skills excel!)
Compression check, vacuum leak check, $60
I'm sure there is more I want to do, but that's my budget for the fall!
Edited by axiomjunglist, 04 August 2004 - 02:06 PM.
#34
Posted 04 August 2004 - 06:52 PM
QUOTE (down4ce @ Aug 3 2004, 11:27 PM)
where can you get falken azenis for $200?
I got them from a place called Takumi Project here in california great place. Take a look at their web site.
Julian
#35
Posted 04 August 2004 - 09:42 PM
total i have to date over 3 grand into my baby.
MoRdAnTlY [Mr. Wolf '91 - '11]
1987 CRX SI D15A3 Goal: <12 Sec 1/4
1987 CRX SI D15A3 Goal: <12 Sec 1/4
QUOTE (cbstdscott)
There is no replacement for displacement... but dicking with the bottom end of a Honda is not very productive. Put your energy into the head, that is where power is made.
...Dicking with the vacuum lines is not how you adjust ignition timing. That requires loosening the three bolts that hold the distributor and twisting on it.
Scott
...Dicking with the vacuum lines is not how you adjust ignition timing. That requires loosening the three bolts that hold the distributor and twisting on it.
Scott
#36
Posted 05 August 2004 - 03:19 AM
86 Dx -1000.00
ColtCam-220.00
Headers-50.00
Holley carb-0
Koni yellows-80.00
Holley blue fuel pump and reg.-90.00
Cheater nitrous-0
Hooker glass pack-30.00
MSD6AL-0
MSD Blaster-50.00
Total so far- 1520.00 Can.
ColtCam-220.00
Headers-50.00
Holley carb-0
Koni yellows-80.00
Holley blue fuel pump and reg.-90.00
Cheater nitrous-0
Hooker glass pack-30.00
MSD6AL-0
MSD Blaster-50.00
Total so far- 1520.00 Can.
Ed
86 Crx DX EW3 block EW2 ported head , Coltcams (nitrous/turbo Stage 2 Triflow )
T-25 with a blowthrough Keihin carb - 13 psi .
I'ma in the Carburetion Nation
86 Crx DX EW3 block EW2 ported head , Coltcams (nitrous/turbo Stage 2 Triflow )
T-25 with a blowthrough Keihin carb - 13 psi .
I'ma in the Carburetion Nation
#37
Posted 05 August 2004 - 09:04 AM
i prefer not to keep track.
well into the "thousands."
and after all that, it still looks like crap and doesn't run 100% right
well into the "thousands."
and after all that, it still looks like crap and doesn't run 100% right
Edited by shadowboy, 05 August 2004 - 09:05 AM.
Shawn
--------
1987 CRX HF, black top D16A1 power.
Best ET so far: 15.130 @ 88.53mph
--------
1987 CRX HF, black top D16A1 power.
Best ET so far: 15.130 @ 88.53mph
#38
Posted 05 August 2004 - 09:30 AM
i hav aorund 5 grand in mine.
bodykit-600
rims 100
two sun roofs 160
paint job 600
motor swap 1,200
fenders 300 (went through alot of them)
tires-600
spoiler 110
exauhst 180
aligmnet 300
new windshield 100
20 % tint 120
fixing the firs engine 500
intake 100
fun driving the car, pricelesss
i have alot more money into it but there is alot of misc crap that i really dont want to write all of it. it would take too long.
bodykit-600
rims 100
two sun roofs 160
paint job 600
motor swap 1,200
fenders 300 (went through alot of them)
tires-600
spoiler 110
exauhst 180
aligmnet 300
new windshield 100
20 % tint 120
fixing the firs engine 500
intake 100
fun driving the car, pricelesss
i have alot more money into it but there is alot of misc crap that i really dont want to write all of it. it would take too long.
#39
Posted 05 August 2004 - 07:32 PM
Okay, I just counted the $ in my rex and it came to $2.31. Enough for some emergency gas or food.
Once a woman is introduced to Colonel Angus, she'll settle for nothing less.
#40
Posted 05 August 2004 - 09:04 PM
mmm well my 85 crx si was $300, plus
fenders, coilovers, shocks, seats, yea that about covers it
total of about $700
fenders, coilovers, shocks, seats, yea that about covers it
total of about $700
QUOTE (cbstdscott @ Feb 28 2010, 10:43 PM) <{POST_SNAPBACK}>
I suck
If a Hatch is Bread van, then what is a Wagon? A bread bus?
Wagoboost project, 7psi and giggling
Turbo Si Wagovan clan member
#41
Posted 05 August 2004 - 10:38 PM
QUOTE (ChrisF-dude @ Aug 5 2004, 07:32 PM)
Okay, I just counted the $ in my rex and it came to $2.31. Enough for some emergency gas or food.
man thats funny. i don't think the person meant "physically" in the bugger, but "spent" on the bugger. iag.
MoRdAnTlY [Mr. Wolf '91 - '11]
1987 CRX SI D15A3 Goal: <12 Sec 1/4
1987 CRX SI D15A3 Goal: <12 Sec 1/4
QUOTE (cbstdscott)
There is no replacement for displacement... but dicking with the bottom end of a Honda is not very productive. Put your energy into the head, that is where power is made.
...Dicking with the vacuum lines is not how you adjust ignition timing. That requires loosening the three bolts that hold the distributor and twisting on it.
Scott
...Dicking with the vacuum lines is not how you adjust ignition timing. That requires loosening the three bolts that hold the distributor and twisting on it.
Scott
#42
Posted 06 August 2004 - 10:31 AM
#43
Posted 06 August 2004 - 01:43 PM
i lost count and quite keeping my recepts after 10 grand. i have over 7 g's in my motor and it isnt done yet.
87 crx ls/vtec
91 ef9 hatch ls/vtec
all-motor is the way all hondas should be.
91 ef9 hatch ls/vtec
all-motor is the way all hondas should be.
#44
Posted 06 August 2004 - 08:19 PM
ok, i'll bite:
$650: CRX
$2000: donor integra (i also daily drove the car for four years before using its parts for the CRX--putting 60k miles on it)
$150: D16A1 (didn't use the one from the integra--that engine is now a spare).
$200 + shipping: Mugen torsion bars (thanx tom!)
$270 + shipping: Koni Yellows (thanx scott, aka integen1 over at g1teg.org)
$100 + shipping: GCs + Eibach springs, 325lbs/in (thanx again to scott)
$115 + shipping: RPR panhard bar.
$70 + shipping: ES bushings (c/o summit racing)
$320 + shipping: wheels (originally bought them for the teg back in 2000)
$225 + installation: CD player (originally for teg)
$260 + shipping & installation: rockford amp (originally for teg--not in CRX yet, need to get new speakers, first, need to get the amp back from my asshole roommates, too).
i can't even count the misc odds & ends of parts & tools & stuff i had to get to complete the project, ie head gasket, water pump, timing belt, head bolts, alt belt, etc, etc.
coming up: $140 shipped for the JR rear sway bar coming my way (same crappy design as ST, but hey, it's an old school part!)
$650: CRX
$2000: donor integra (i also daily drove the car for four years before using its parts for the CRX--putting 60k miles on it)
$150: D16A1 (didn't use the one from the integra--that engine is now a spare).
$200 + shipping: Mugen torsion bars (thanx tom!)
$270 + shipping: Koni Yellows (thanx scott, aka integen1 over at g1teg.org)
$100 + shipping: GCs + Eibach springs, 325lbs/in (thanx again to scott)
$115 + shipping: RPR panhard bar.
$70 + shipping: ES bushings (c/o summit racing)
$320 + shipping: wheels (originally bought them for the teg back in 2000)
$225 + installation: CD player (originally for teg)
$260 + shipping & installation: rockford amp (originally for teg--not in CRX yet, need to get new speakers, first, need to get the amp back from my asshole roommates, too).
i can't even count the misc odds & ends of parts & tools & stuff i had to get to complete the project, ie head gasket, water pump, timing belt, head bolts, alt belt, etc, etc.
coming up: $140 shipped for the JR rear sway bar coming my way (same crappy design as ST, but hey, it's an old school part!)
Shawn
--------
1987 CRX HF, black top D16A1 power.
Best ET so far: 15.130 @ 88.53mph
--------
1987 CRX HF, black top D16A1 power.
Best ET so far: 15.130 @ 88.53mph
#45
Posted 06 August 2004 - 08:52 PM
I have at least $7,000 to $10,000 into it including the original price i bought it for and when the police repoed it and i had to buy it back from them. they were going to auction it if i didn't. I try not to think about how much I have put into it. But I think it's more of an investment than anything. Pretty soon I'm going to drop another couple g's into it too. it never stops
SportInjectedClub