Was wonding if anyone knew of any exhaust manifold turbo flange that would work on a 1 gen, or a good business that can make one? Thanks for any information.
1
Exhaust Manifold Turbo Flange
Started by CivicB20z, May 20 2004 08:38 PM
10 replies to this topic
#1
Posted 20 May 2004 - 08:38 PM
#2
Posted 21 May 2004 - 12:39 AM
#3
Posted 21 May 2004 - 06:25 AM
Thanks, anyone mess with putting a turbo on a stock 1.5, seen one on ebay, for a 1 gen, anyone else make a home made turbo kit, any fitment problems, or ideas, thanks alot.
#4
Posted 21 May 2004 - 06:42 AM
Biggest problem is the radiator... Most of the guys here get the half radiator from the HF or a later civic... Maybe one of the turbo guys would chime in here to give you more advice..
RIP Block# D16A12011451.. It will be missed..
James Bond (Diamonds are Forever): "That's a nice little nothing you're almost wearing. I approve."
James Bond (Diamonds are Forever): "That's a nice little nothing you're almost wearing. I approve."
#5
Posted 21 May 2004 - 08:37 AM
Best advice I could give you would be to goto www.homemadeturbo.com
The guys on there work WONDERS with rex's and turbocharging them. Also while your there you can check out my turbo'd 97 civic hatchback!
Nick
The guys on there work WONDERS with rex's and turbocharging them. Also while your there you can check out my turbo'd 97 civic hatchback!
Nick
#6
Posted 21 May 2004 - 09:54 AM
The dude's name is Sam and his ad is sticky'd on the for sale section of HomeMadeTurbo.Com
Make sure you tell him the flange adapter is for a first gen 1.5
I have the very first one he made and I'm sure he kept the pattern.
Make sure you tell him the flange adapter is for a first gen 1.5
I have the very first one he made and I'm sure he kept the pattern.
#7
Posted 21 May 2004 - 12:06 PM
for wat it's werth I have an old turborex flange...not as shines but never gave me any problems....I also have the ext manifold that it bolts onto
Aidan
5150 Autosports
15110 E. Nelson #C
Industry, Ca 91744
(626) 806-5150
www.socalracer.com
5150 Autosports
15110 E. Nelson #C
Industry, Ca 91744
(626) 806-5150
www.socalracer.com
#8
Posted 21 May 2004 - 01:06 PM
QUOTE (5150CRX @ May 21 2004, 12:06 PM)
for wat it's werth I have an old turborex flange...not as shines but never gave me any problems....I also have the ext manifold that it bolts onto
if you dont want it i do
QUOTE (cbstdscott @ Feb 28 2010, 10:43 PM) <{POST_SNAPBACK}>
I suck
If a Hatch is Bread van, then what is a Wagon? A bread bus?
Wagoboost project, 7psi and giggling
Turbo Si Wagovan clan member
#9
Posted 21 May 2004 - 02:13 PM
well I could prolly be talked into selling it.....pm me if you're interested
Aidan
5150 Autosports
15110 E. Nelson #C
Industry, Ca 91744
(626) 806-5150
www.socalracer.com
5150 Autosports
15110 E. Nelson #C
Industry, Ca 91744
(626) 806-5150
www.socalracer.com
#10
Posted 21 May 2004 - 02:17 PM
#11
Posted 21 May 2004 - 02:50 PM
the stock del sol rad is dual core? i thought only the aftermarket ones were.
scott
scott
"Why dont you just put a pussy on the front of that car? It takes more money than I do." - The Wife
vouch thread 1 2
vouch thread 1 2
QUOTE (kaymo @ Mar 2 2009, 02:23 PM) <{POST_SNAPBACK}>
sure its no ferrari, and its no pussy magnet