Hello all...Me and my boy cyrus(1rstgencrxlover) when to the yard and dug up a si intake today...then we cut and modded it at his job..as you can see I plugged the injector ports with ep-200 epoxy..luv that stuff!!!
All in all this cbr600 carbs project is comming along...now all I need is a si head,and an electric fuel pump....I hope..lol
What yall think...any input on this project ???TOM
1
Si Intake,modded For Bike Carbs...
Started by lilneedle, Jun 29 2006 09:18 PM
45 replies to this topic
#1
Posted 29 June 2006 - 09:18 PM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#2
Posted 29 June 2006 - 09:26 PM
right on i never even thought about a injected intake good stuff
My Webpage
(quote by RareCrx)HAVE A MADD TYTE DIGGITY DOGG ,BUBBLES SPRAYIN ON THE INTERCOOLER, poopin ON A 8 SECOND CHEVELLE WITH MY MINI-ME SWAP DAY..
#3
Posted 29 June 2006 - 09:29 PM
Thanx...Cyrus and I brewed this one up...hasn't anyone done this before or bike- carbed a 1.5 carbed engine???I wonder what kinda power increase i'll get any guess peeps???if not alot I need to jet these puppies...huh??TOM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#4
Posted 29 June 2006 - 09:36 PM
thought i saw a pic where someone put nipple in the inj ports for vac
Si Wagovan-Clan Member
#5
Posted 29 June 2006 - 10:55 PM
my carb manifold has the brake booster vacuum off #1 cylinder and the vac advance off #4. the water jackets pipes are cut off and jb welded over too.
for my cbr650 carbs the civic dx cable was too long. im going to have to fav a cable stop
for my cbr650 carbs the civic dx cable was too long. im going to have to fav a cable stop
#6
Posted 29 June 2006 - 10:58 PM
#7
Posted 01 July 2006 - 03:00 AM
What intake is that???and also what are those grey hose thingys you used going from the runners to the carbs????help...
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#8
Posted 01 July 2006 - 03:29 AM
Seeing how we're posting manifold pics . here's my D16A1 manifold with the carbs on it. I used tire valve stems, with the valves removed, to go where the injectors were so I can run vacuum lines from those to power the brake booster and the vacuum advance on the distributor.
#9
Posted 01 July 2006 - 10:04 PM
Well I won these on ebay 2 days ago..lol they were on my front porch today...suprising....anyways I am having trouble lining this ew3 intake up with it...I need to either cut it more or huh???what yall think ???and like da carbs???TOMhelp
What yall think????
What yall think????
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#10
Posted 01 July 2006 - 10:18 PM
Reduce your runner length, and utilize some fuel resistant tubing. and some snake clamps for your runners.
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#11
Posted 01 July 2006 - 10:33 PM
Also ...do you see that little black lever on the top of the carb???a cable hooks up to that it looks like...its not throttle it makes something move..loll in each carb when you yank it....Choke????help???TOM
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
#12
Posted 02 July 2006 - 12:12 AM
time for some tig welding
QUOTE (Ghost-One @ Jun 22 2004, 06:08 PM)
They got that engine out withtheir mighty facial hair cant you see
Team BUrnOUt Member # 3
#13
Posted 02 July 2006 - 12:29 AM
QUOTE (lilneedle @ Jul 1 2006, 10:33 PM)
Also ...do you see that little black lever on the top of the carb???a cable hooks up to that it looks like...its not throttle it makes something move..loll in each carb when you yank it....Choke????help???TOM
Yes, that is a manual choke. You are going to need to fab up a cable of your own to have this operate within the cabin. I think some parts stores might carry a kit. But I am not sure. You can always try to find a choke cable online or ebay.
Honda, because it's hard to look baller in your mom's Volvo.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
The entire tool selection at Sears or the contents of a Snap-On truck will do you no good if you do not know how to use them.
#14
Posted 02 July 2006 - 04:09 AM
lol i love the way you have the carby set up just sitting on your bed if that was me ... me girlffriend will kill me
#15
Posted 02 July 2006 - 09:58 AM
OH...MY girl gets mad too....I don't need that choke to start my ride...right??
FORSALE$700BUX...
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.
86 1300 3G With Teg conversion...DOHC BABY!!!
SAHCR-Saving Abused Hondas for Cleanup and Restoration-member.