Chikara Header...
#1
Posted 07 March 2007 - 01:37 AM
84-87 Civic, CRX Si 1.5L
Primary tube: 1-1/2"
Collector: 2"
#EAB265560 (painted)
Is this the correct one? Is there a cheaper place to get it?
I should also get an Si oil pan, is that all I need?
Thanks!
#2
Posted 07 March 2007 - 02:01 AM
#3
Posted 07 March 2007 - 03:44 AM
My Webpage
(quote by RareCrx)HAVE A MADD TYTE DIGGITY DOGG ,BUBBLES SPRAYIN ON THE INTERCOOLER, poopin ON A 8 SECOND CHEVELLE WITH MY MINI-ME SWAP DAY..
#4
Posted 07 March 2007 - 09:54 AM
84-87 Civic, CRX Si 1.5L
Primary tube: 1-1/2"
Collector: 2"
#EAB265560 (painted)
Is this the correct one? Is there a cheaper place to get it?
I should also get an Si oil pan, is that all I need?
Thanks!
That is the right one. You need the Si oil pan. You also need the Si catalytic converter (magnaflow sells a direct fit one) or the front bendy part because that header points right at a part of the frame or sub-frame. If you don't use a cat then you need a pipe with the same s-bend as the front part of the Si one. I am just about to make one of these because I will not use a 2" cat but a 2.25". I suppose I could supply one to you also.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#5
Posted 07 March 2007 - 06:41 PM
#6
Posted 07 March 2007 - 06:48 PM
Once a woman is introduced to Colonel Angus, she'll settle for nothing less.
#7
Posted 07 March 2007 - 06:53 PM
The same place you get any other part: the Honda dealer, the Honda parts dealer online, the junkyard, a private seller, Ebay, etc.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#8
Posted 07 March 2007 - 06:54 PM
The torque steps have a wider portion in each runner, correct?
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#9
Posted 07 March 2007 - 10:20 PM
#10
Posted 07 March 2007 - 10:32 PM
Break into the Honda museum in Japan. Don't worry. Most of their cops don't carry guns.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND
#11
Posted 07 March 2007 - 10:49 PM
#12
Posted 07 March 2007 - 11:05 PM
1) Is the oil pickup already in the Si oil pan or do I buy it extra?
2) With the Chikara header - will everything fit if I use a full sized radiator or do I need a 1/2 rad?
#13
Posted 07 March 2007 - 11:13 PM
1) Is the oil pickup already in the Si oil pan or do I buy it extra?
2) With the Chikara header - will everything fit if I use a full sized radiator or do I need a 1/2 rad?
i think u buy extra..why not just port-polish the stock headers?hp increase better flow.
#14
Posted 07 March 2007 - 11:26 PM
#15
Posted 08 March 2007 - 06:30 PM
1) Is the oil pickup already in the Si oil pan or do I buy it extra?
2) With the Chikara header - will everything fit if I use a full sized radiator or do I need a 1/2 rad?
The oil pick up is like an upside down snorkel with a screen on the end and bolts onto the oil pump and brackets bolt to the crank girdle. You must purchase it seperately.
YOu can use the either radiator.
Going to Hawaii? You need a Dune Buggy.
WTB: 14x8 or 9" Panasports or Watanabe RS.
WTB: 3g Civic hatch gauge cowl, brown.
WTB: ZC header--FOUND