Jump to content




Turbo Update Number Two

Started by C_piddy, Jun 13 2004 10:49 PM

  • You cannot reply to this topic
10 replies to this topic

#1
C_piddy
Posted 13 June 2004 - 10:49 PM

  • Leadfoot
  • PipPipPipPipPip
    • Group: Members
    • Location:hamilton ontario canada
    • Drives: 1987 turbo zc (turbo edit) -1986 carb dohc zc hf
boman and cpiddy project number two

here we are time to fit the bastard.......

and the pics

the turbo is going to fit... so will the stock hood latch.. which is great.


beauty


still have to rotate the turbo housings.


another cool shot


this is where we hit the first problem... the rad won't fit... the hf rad is too small. so.. we are goning to get like a 98 civic radator. or something smaller, and then the down pipe will totaly fit.




my favourite shot....

this is it.... the project so far... hope you like it...
and i hope it will be done for n10

chris + jakob
no fighting in the war room!

                                       Dr. Strangelove

#2
nivek2002
Posted 13 June 2004 - 10:53 PM

ahhh who needs a radiator!

biggrin.gif Looking awesome guys! Turbos are dead sexy, especially new ones cool.gif


My Vouch Thread

#3
eastsiderider
Posted 13 June 2004 - 10:54 PM

  • Function over form!
  • PipPipPipPipPip
    • Group: Members
    • Location:Maryland
    • Drives: 91 Civic Standard Hatch (B16 powered), 02 Civic EX, 03 Civic Si R.I.P.
    • Image Gallery
Looking good..........thats going to be 1 hot 1g ph34r.gif
SportInjectedClub

#4
Rampage
Posted 13 June 2004 - 11:09 PM

  • I bleed motor oil.
  • PipPipPipPipPipPip
    • Group: Moderators
    • Location:Vancouver, British Columbia
    • Drives: The Si (86 Civic Si D16A1 blacktop) The Blackbird (87 CRX Si Bone Stock) Cherry II (86 Civic 1500S Mostly Stock)
    • Image Gallery
    Garage View Garage
Nuts man, thats sick....

Getting a rad in is going to be tough, but its the least of your worries, I know you will figure something out no problem.

Good luck the rest of the way.

Cheers,
Mark

SportInjectedClub

I don't frequent the boards much anymore, but i'm a wealth of knowledge. Email or PM me if you're stumped!

#5
bryman10
Posted 13 June 2004 - 11:32 PM

  • Sterno
  • PipPipPipPipPip
    • Group: 2013 Contributor
    • Location:Asheboro, NC
    • Drives: 2006 Acura TSX 6MT, 2012 Honda Civic LX sedan (wifey's); 1996 Toyota Celica GT convertible (for sale)
    • Image Gallery
Looking great guys!
Just an FYI, you may want to consider a 5th gen civic radiator ('92-'95). We were going to go this route w/ project ULT1GCRX, but John had a leftover Fluidyne (couldn't resist that!)
Here's a pic. of the 5th gen civi's rad:

You can see more pics. of the radiator placement
HERE

Hope to see the finished product at N10!

bryman
Who the hell is this Zed C. person????
my ebay ID: sterno10

"Please", "I appreciate it", "thank you very much", "I'm sorry"= common courtesy....what a great concept (ESPECIALLY for business)!!



Posted Image

Posted Image
Wagonvan clan member

#6
I are Corey
Posted 14 June 2004 - 12:32 AM

  • ...how dare you
  • PipPipPip
    • Group: Members
    • Location:Baltimore Maryland, United States
    • Drives: 1987 Civic Si Hatchback
    • Image Gallery
    Garage View Garage
maybe its just a bad angle but will that front fender fit on cause it LOOKS like the manifold kind sticks out. could be wrong though.

NICE job. looks great

Edited by I are Corey, 14 June 2004 - 12:33 AM.


<span style='color:red'>SportInjectedClub</span>

#7
UltimX
Posted 14 June 2004 - 12:33 AM

  • Slowpoke
  • PipPip
    • Group: Members
    • Location:Santa Cruz County, CA
C_piddy: Looks good!

Bryman10: out of the 3 or 4 crx's there, which one was the fastest at the quarter? Nice job man. keep up the good work.

#8
C_piddy
Posted 14 June 2004 - 12:46 AM

  • Leadfoot
  • PipPipPipPipPip
    • Group: Members
    • Location:hamilton ontario canada
    • Drives: 1987 turbo zc (turbo edit) -1986 carb dohc zc hf
fits with about 5 or 6 inches clearance.. .must be a bad angle... we are still worried that we will melt header panels.

chris
no fighting in the war room!

                                       Dr. Strangelove

#9
Rampage
Posted 14 June 2004 - 01:35 AM

  • I bleed motor oil.
  • PipPipPipPipPipPip
    • Group: Moderators
    • Location:Vancouver, British Columbia
    • Drives: The Si (86 Civic Si D16A1 blacktop) The Blackbird (87 CRX Si Bone Stock) Cherry II (86 Civic 1500S Mostly Stock)
    • Image Gallery
    Garage View Garage
QUOTE (C_piddy @ Jun 13 2004, 10:46 PM)
fits with about 5 or 6 inches clearance.. .must be a bad angle... we are still worried that we will melt header panels.

chris

I would be PROUD to melt my header panel.... ph34r.gif

Cheers,
Mark

SportInjectedClub

I don't frequent the boards much anymore, but i'm a wealth of knowledge. Email or PM me if you're stumped!

#10
pwr_crx
Posted 14 June 2004 - 02:01 AM

tongue.gif haha, it would have to be pretty hot in there to melt a civic header panel...maybe even icey hot rolleyes.gif
Bryan....
user posted image

87 Si Dohc - T

#11
C_piddy
Posted 14 June 2004 - 07:38 AM

  • Leadfoot
  • PipPipPipPipPip
    • Group: Members
    • Location:hamilton ontario canada
    • Drives: 1987 turbo zc (turbo edit) -1986 carb dohc zc hf
we expect our header panel to glow red.

it will be hot enough to melt the header panel for sure

chris biggrin.gif
no fighting in the war room!

                                       Dr. Strangelove
Back to 1G CRX


  1. Red Pepper Racing
  2. → 1G Honda CRX/3G Honda Civic
  3. → Technical
  4. → 1G CRX
  5. Board rules