Crx Gsr Turbo Swap Build (Pics)
#16
Posted 07 April 2015 - 10:53 PM
-06 Evo IX-
-90 Eclipse GSX-
-87 CRX Si-
-87 CRX HF(i)-
#17
Posted 10 April 2015 - 09:41 AM
Great Project! Not sure what your running for rubber hose there, maybe you know this, maybe you don't, but guessing it's fuel line and not hydraulic coming off you clutch master cylinder since it says Gates right on it. Can't run fuel line because as you press on the pedal the line will swell before it moves the slave cylinder forward to engage your clutch. This is what I am going to use:Stainless Steel Clutch Line 92-00 Civic 94-01 Integra Black Complete Replacement
http://www.ebay.com/itm/141168977171?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
#18
Posted 10 April 2015 - 05:23 PM
Edited by SHOGUNOVDDRK, 10 April 2015 - 05:24 PM.
#19
Posted 11 April 2015 - 01:10 PM
But im still on the lookout for better hose.
My manifold will be delivered monday from go autoworks
Ramhorn combo with 44mm gate and 3" downpipe pics
Soon to come
- PuddleSkipper likes this
#20
Posted 12 April 2015 - 02:42 AM
Super interested in how you route your lines to and fro your clutch master cylinder so please post pics! I was looking at using pre-existing holes but might just give up and drill my own through the firewall, at least for the reservoir. Will probably just use the clutch cable hole for the pressure line. Was thinking about running a hard line on the inside up to the firewall to an anodize firewall fitting and use the braided line the rest of the way. That way I don't have to worry about the line getting rubbed on by the clutch pedal on its way through the firewall.
#21
Posted 12 April 2015 - 08:18 PM
Heres some more progress from today got new heater hoses and alt and belt on as well as the shift linkage on its a little to short but ill live with it for now
Then got the manifold on
Cant wai till tomorow the manifold will ve here
#22
Posted 15 April 2015 - 09:16 AM
#23
Posted 15 April 2015 - 09:18 AM
#24
Posted 15 April 2015 - 09:24 AM
Some pics of the weldsdidnt get pics of it on the car cause i took it off when the downpipe didnt fit but they are coming soon enough
#25
Posted 15 April 2015 - 09:15 PM
#26
Posted 05 May 2015 - 10:18 AM
Pics soon to come.
Billy.